Updated BI to 5.8.1.5 and now my EmpireTech Cam wont alert anymore

S

speedway1213

Young grasshopper
Sep 18, 2022
34
7
Los angeles
IPC-T5442TM-AS-3.6mm
Used to work fine on the older version of BI, alerting thru pushover.
Now - I cant get any alerts. Nothing changed except updated blue iris.

Pushover works (Manual alert via BI)
But something must be going on with the signals coming from the camera over to BI (via ONVIF?) I tried rebooting everything (cams, system), deleted and readded the camera in BI etc. Dont know whats up.
 
Is it throwing any errors in the log or the little yellow triangle?

What version did you come from?

In the camera GUI, Under Network > Access Platform, turn onvif authenticator off and see if that fixes it.
 
Last edited:
This specific cam is not throwing any yellow excalamination marks, but the other cams I have on my network (total of 23) are. Anyway for this specific cam < I turned off the Onvif authenticator and it seemed to work!
How did you figure that out?
 
You must log in or register to reply here.
Top Bottom