Upgrading to a combined POE+Switch box & adding cameras, Opinons?

[Bradmph]

Time to update to a combined POE/Switch,

I have 7 cameras presently running thru a seperate POE and a Switch into a dedicated intel PC system(see Below) . I want to increase to 2 more cameras for a total of 9.
Since I don't have any cable room on the present hardware, I searched around and the Netgear GS316PP looked to be a decent upgrade with the POE & Switch combined and @ 183w.
I was concerned about having enough power in a new POE/Switch box to run additional cameras.
Does anyone have anything suggestions before pulling the trigger on this new Netgear part?

 

[Ri22o]

I have no experience with that switch, but I am sure others do.

I am running two of these IPCamPower 24 port POE+ 250w switches and have had no issues. They also offer a 16 port with 200w budget.

https://a.co/d/09RuNVC

 

[TonyR]

Do or did you actually have the switch with all the cam streams and the PC with VMS both plugged into your router?
I'd plug the PC into the switch.

 

[Keizer]

I have that Netgear POE + switch. Five 4K cams, two PTZ cams and two 4mp cams attached. Its been rock solid.

 

[Flintstone61]

Its a pretty decent Buy for $183. considering it has management options for Vlan,,,and it's Gigabit thru and thru,,,,,

 

[looney2ns]

The netgear switch will serve you well.

 

[Bradmph]

Do or did you actually have the switch with all the cam streams and the PC with VMS both plugged into your router?
I'd plug the PC into the switch.

It's shown above in the image.

 

[Bradmph]

The netgear switch will serve you well.

I am studying and researching. What better place to start asking is in here.

 

[Bradmph]

I have no experience with that switch, but I am sure others do.

I am running two of these IPCamPower 24 port POE+ 250w switches and have had no issues. They also offer a 16 port with 200w budget.

https://a.co/d/09RuNVC

That particular one you run is only rated 10/100 POE Rated Ports. The Netgear is 10/100/1000. I run a cable ISP with 473.5Mbps

 

[TonyR]

It's shown above in the image.

I can see that but you have been moving things around, you said, so.....
I'd still plug the VMS PC into the POE switch, not the router....if it were me.

 

[Ri22o]

That particular one you run is only rated 10/100 POE Rated Ports. The Netgear is 10/100/1000. I run a cable ISP with 473.5Mbps

Cameras only need 10/100. It has two 1000 uplink ports.