Can I use something like this to power a tp-link POE switch ?
So I can power 4 ip camera from one wire.
So I can power 4 ip camera from one wire.
As an Amazon Associate IPCamTalk earns from qualifying purchases.
use a poe splitter to power a POE tp-link poe switch
- Thread starter tt7878
- Start date
A very definite NO.
You're better off trying this ==>> POE Extender RJ45 4-Port 10/100M IEEE802.3at (Power-in) to IEEE802.3af (Power-Out) for Ethernet/PoE Power AP, IP Camera, IP Telephone and Other Network equipments
That being said, you still must insure your total camera power demand, especially at night when the IR is activated, won't exceed the device's power capacity and that you comply with other requirements specified by the device linked above.
Last edited:
As an Amazon Associate IPCamTalk earns from qualifying purchases.
Thanks for the quick response.
I didn't know this existed and I'll check it out.
I didn't know this existed and I'll check it out.
I will recommend you the below product. It can power 4 ip camera from one wire.
4 ports PoE Extender to split one PoE cable to power 4 PoE devices, and extend PoE transmission another 330ft
POE-Extender04 is a hardened passive 4-port POE extender with total 90W POE budget and Gigabit uplink. It can be used to provide power to 4 POE devices (like IP cameras or VoIP hones) with just one POE network cable. Outstanding Features: • Extend POE Distance upto 820ftWith Long distance POE...eu.linovision.com
Wow do you work for linovision since you are commenting and recommending linovision gear on 1 year old threads lol...