I have already installed 5 hikvision cameras around the house. I have been trying to find a way to get rid of the peephole in the door and put a camera outside and a monitor inside by the door dedicated to that camera. While also being a regular POE Ip cam running along with 5 existing hikvision cameras on the hikvision NVR.
Now the way I was thinking of doing this was connecting the camera as I normally connect any security camera using a cat5e or cat6 cable. This would run to the NVR and integrate with the security system. Now for the monitor I would run another cable from the video out that is on the camera which you use to set up cameras.
Would this set up work Can video out on the cameras be used for this purpose? would both video outputs work at the same time?
Any other suggestions out there that offer 1080p quality or equivalent and while not costing arm n leg?
Thanks.
Now the way I was thinking of doing this was connecting the camera as I normally connect any security camera using a cat5e or cat6 cable. This would run to the NVR and integrate with the security system. Now for the monitor I would run another cable from the video out that is on the camera which you use to set up cameras.
Would this set up work Can video out on the cameras be used for this purpose? would both video outputs work at the same time?
Any other suggestions out there that offer 1080p quality or equivalent and while not costing arm n leg?
Thanks.