Using router FTP function as storage for cam IPC-B52IR-Z12E S2 for LPR purpose?

[richardgohth]

I had reinstall the netgear firmware. I can access ftp on the router using winscp on my computer.

View attachment 195056

The link is ftp:/readyshare.routerlogin.net/shares/ which can't be used on the camera setting so I use 192.168.0.250 (router lan ip)



Still get the message "Failed to connect to server" when click test. What should I do next? (the whole system is not connected to internet)

1. camera screen, please attach complete screen
2. check ftp server error log if any ( if no log, test by setting up ftp server on your pc )
3. most likely directory structure is in error
4. start with "Use Level 1 Directory"

 

[thlong]

1. camera screen, please attach complete screen
2. check ftp server error log if any ( if no log, test by setting up ftp server on your pc )
3. most likely directory structure is in error
4. start with "Use Level 1 Directory"

Here is the screen


I set to lvl 1 directory. It said "failed to verify permission".

I setup ftp on window. The physical path is D:\ftptest which is unable put on the camera. What should I use for the path?

I'll search how to use ftp error log after work.

 

[looney2ns]

You have User Name set as adnin, is that what you intended? If not, then it should be admin.

 

[thlong]

You have User Name set as adnin, is that what you intended? If not, then it should be admin.

I meant to use admin. I've been going back and forth between using a using a username or leave it blank. I checked, it said "test failed, the user has no write permission." The storage path I copy from winscp since the router doesn't show what it is.

 

[richardgohth]

Here is the screen
View attachment 195083

I set to lvl 1 directory. It said "failed to verify permission".

I setup ftp on window. The physical path is D:\ftptest which is unable put on the camera. What should I use for the path?

I'll search how to use ftp error log after work.

where is this directory structure from?
did u use the same when you were able to upload using wincvs?
use the same directory as wincvs

 

[thlong]

where is this directory structure from?
did u use the same when you were able to upload using wincvs?
use the same directory as wincvs

View attachment 195106

I just realize you said to use wincvs. I searched ftp client and thought winscp is what you ask me to use. Is this wincvs? CvsGui - Downloads

The directory is from winscp.

I jsut do a quick scan on the camera using nmap. Is port 21 supposed to be there?

 

[richardgohth]

I just realize you said to use wincvs. I searched ftp client and thought winscp is what you ask me to use. Is this wincvs? CvsGui - Downloads

The directory is from winscp.

I jsut do a quick scan on the camera using nmap. Is port 21 supposed to be there?

View attachment 195125

Sorry winscp