Vertical Mount PTZ?

P

philcav7

n3wb
Apr 15, 2021
24
12
I would like to wall mount (vertically) a compact PTZ. The camera location is on my front porch about 9’ above grade, 7’ above porch floor level. 3’ horizontal

I understand that tilt will be a limitation and most offer a 0°-90°range.

The Hikvision DS-2DE4A425IW-DE is specified to have a -5° tilt. Would this offer a suitable downward field of view?

Or is there another camera option that would be suitable for this installation?

I really, really want to avoid a clunky looking mounting bracket if possible.
 
  • Like
Reactions: mat200
You should be able to flip the camera 180° so the tilt works downward.
I was just looking at the in ceiling 2mp PTZ and saw it has a 180° auto flip. I have 2 locations where I won’t be able to gain in ceiling access and will have to mount them on the wall and was wondering the same thing.
Please correct me if I’m wrong. F326368D-84D9-4C72-93EA-0FE78A13FE25.jpeg
 
philcav7 said:
I would like to wall mount (vertically) a compact PTZ. The camera location is on my front porch about 9’ above grade, 7’ above porch floor level. 3’ horizontal

I understand that tilt will be a limitation and most offer a 0°-90°range.

The Hikvision DS-2DE4A425IW-DE is specified to have a -5° tilt. Would this offer a suitable downward field of view?

Or is there another camera option that would be suitable for this installation?

I really, really want to avoid a clunky looking mounting bracket if possible.
Click to expand...

In general the PTZ is designed to be mounted in a particular way .. mounting it on it's side will cause more issues with balance and gears / motors .. depending on the weight / strength of motor and gears you can expect more trouble ..


1661349173450.png
 
  • Like
Reactions: Sybertiger and sebastiantombs
If I understand correctly, you want to mount the base of the PTZ directly to a vertical wall? In that case I would agree that "gravity" could potentially be an issue. However, to answer your question I believe the 5 degrees you are referring to is the amount of tilt toward the "base" of your unit. So, with the PTZ mounted directly to the wall would mean the PTZ could look toward the wall direction up to 5 degrees.

1661349386392.png
 
  • Like
Reactions: mat200
Sybertiger said:
If I understand correctly, you want to mount the base of the PTZ directly to a vertical wall? In that case I would agree that "gravity" could potentially be an issue. However, to answer your question I believe the 5 degrees you are referring to is the amount of tilt toward the "base" of your unit. So, with the PTZ mounted directly to the wall would mean the PTZ could look toward the wall direction up to 5 degrees.
Click to expand...

Yes, exactly what I’m hoping to do. I wasn’t thinking properly with the -5° tilt. Your right, it’s towards the base. For me to get any downward (greater than 90°) view, I would need to install the camera upside down. I’m not sure if image can be “flipped” to provide the correct orientation or not. Filming upside down is obviously not an option.

I definitely understand the gravity thing and have seen that brought up during searches. I’m not sure if that’s anecdotal speculation or a factual problem. Being a primary camera on the front of house, PTZ will be used regularly with tours/presets to cover the porch and parking area. I’m hoping I can make it work.

Doing a bracket is pretty much off the table. They’re fugly and bulky on a residence. I already have a soffit mounted PTZ on the corner and was hoping to convert a few existing cams to PTZ as well.
 
Mike A. said:
Why not just use a wall-mount bracket?

Something like this:

Wall Mount for DS-2DE2Axx Series PTZ

The wall must be capable of supporting at least three times as much as the total weight of the camera and the mount.
us.hikvision.com us.hikvision.com
Click to expand...


FYI - posting here, in case the page moves .. as happens often enough on the net now ..

1661361686851.png
 
  • Like
Reactions: sebastiantombs
Loosened the module screws at the bracket and found some longer screws for upfront, slipped a shim in the front, giving maybe 7 degrees extra negative tilt. The screws mount into plastic plates, so use tiny screwdriver as to not torque it to much. Tilted the dome 3 or 4 degrees skyward and got rid of any module covers.
 
looney2ns said:
You do understand that if you pan the camera, the view will be at an angle. It won't flip on demand.
PTZ's simply are not designed to be mounted that way.
One of these would work: Review-Dahua/EmpireTech Dual lens IPC-HDBW5441F-AS-E2 (The Boobie Cam Upgrade) | IP Cam Talk
Click to expand...

Yeah. I know. It just sucks that the form factor of most PTZ are so off putting. It seems like a relatively simple design tweak to permit vertical placement.

A dual sensor hadn’t crossed my mind as I was really hoping to find a PTZ to fit my needs. I will scope them out as it may be my best option.
 
  • Like
Reactions: looney2ns
You must log in or register to reply here.
Top Bottom