Having issues with the cameras time not being synced with VMS-4200 software. When opening the software and selecting the 3 aux screens to display the times on all cameras will be fine then over time each will go out of sync as bad as about 45-60 seconds. We have 21 cameras currently but want to expand to 23. All recording at 1080 20 frames. The main screen in VMS-4200 has 9 cams, AUX1 has 7 cams and AUX2 has only 1 cam. Any suggestions would be great.
Setup:
NVR:DS-9632NI-ST
NVR NIC1 to POE switch that cameras are connected to
NVR NIC2 to non managed Trendnet 5 port gigabit switch
PC with VMS-4200 is plugged into Trendnet gigabit switch
PC Specs:
I7-7700
16GB DDR4
250GB SSD
Nvidia NVS 510
Setup:
NVR:DS-9632NI-ST
NVR NIC1 to POE switch that cameras are connected to
NVR NIC2 to non managed Trendnet 5 port gigabit switch
PC with VMS-4200 is plugged into Trendnet gigabit switch
PC Specs:
I7-7700
16GB DDR4
250GB SSD
Nvidia NVS 510