Virtual Host and Longsee Cameras

[lovedgor]

After enabling virtual host on my Hikvision NVR, I can successfully access the Hikvision cameras, but not the Longsee. Does the management port need to be 8000 for this to work?

Thanks

 

[klasipca]

I just went through this and virtual host works fine with either Longse or Huisun. You need to use ONVIF and HTTP port which by default is 80.

 

[lovedgor]

I had connected other cameras to the NVR to test. I had to restore the NVR to default, then reconnect these cameras. It's working now.
Thanks