Virtual Host

[maspirault]

Hello
I have a problem with the access to my camera from the virtual host in to the nrv hikvision.

The virtual host option is acvite in the advanced options and when I click on the link it brings me to the following link
http://192.168.1.167:65500/
But it tells me page unavailable

In my research I think it should show me more in the link, like /doc/page/login ........ but not in my case

My NVR is a Hikvision DS-7608NI-E2/8P V3.4.3 build 160822

 

[zero-degrees]

Hello
I have a problem with the access to my camera from the virtual host in to the nrv hikvision.

The virtual host option is acvite in the advanced options and when I click on the link it brings me to the following link
http://192.168.1.167:65500/
But it tells me page unavailable

In my research I think it should show me more in the link, like /doc/page/login ........ but not in my case

My NVR is a Hikvision DS-7608NI-E2/8P V3.4.3 build 160822

1. Assure Virtual Host is Active
2. I assume your NVR address is 192.168.1.167
3. Go here: 192.168.1.167:6500X - with X being the camera port you want to access.
4. For example camera/port 1 would be 192.168.1.167:65001
5. For Example camera/port 2 would be 192.168.1.167:65002
6. Etc - you get the idea? Not sure where you 65500 port info came from but it is incorrect for HIKVision hardware and why you are prob. getting a no page available error.

 

[maspirault]

1. Assure Virtual Host is Active : Ok
2. I assume your NVR address is 192.168.1.167 : Yes
3. Go here: 192.168.1.167:6500X - with X being the camera port you want to access.
4. For example camera/port 1 would be 192.168.1.167:65001
5. For Example camera/port 2 would be 192.168.1.167:65002
6. Etc - you get the idea? Not sure where you 65500 port info came from but it is incorrect for HIKVision hardware and why you are prob. getting a no page available error.

I change the port for 65001 for testing



Maybe my problem is that my home lan is on the 192.168.1.x and the integrated POE switch of the NVR is also in the 192.168.1.x range

Can i change the range of the NVR

 

[zero-degrees]

Your internal NVR IP's should not be the same as your network, this could be causing some of your problems but not sure - this is also not how they come standard, if this is the case I believe you already manually changed these. When you have built in POE into the NVR, that network should always be segmented and is different than your home network for a reason. You need to return your NVR IP range to default and try again.

 

[maspirault]

Thanks it's works