Wall mount compatibility of various brackets and bullet cams

[Mike Mo]

Can anyone personally confirm that the wall mount PFB121W is compatible with the bullet cams of the ipc-hfw5231 series including the 5231e-z5, 5231e-z12, and 5231e-z.

I looked at the flow chart on their website, http://www1.dahuasecurity.com/download/Accessory_Selection201705052.pdfand it seems like it is although don't see the plain -z or the -z5 specifically mentioned.

Other models labeled 5231 seem to be part of the HFW7 shape on the chart, and it seems as if there is an arrow from the mount to that shape. But, the flow chart is somewhat confusing to me.

Thanks in advance

 

[BillG]

Can anyone personally confirm that the wall mount PFB121W is compatible with the bullet cams of the ipc-hfw5231 series including the 5231e-z5, 5231e-z12, and 5231e-z.

I looked at the flow chart on their website, http://www1.dahuasecurity.com/download/Accessory_Selection201705052.pdfand it seems like it is although don't see the plain -z or the -z5 specifically mentioned.

Other models labeled 5231 seem to be part of the HFW7 shape on the chart, and it seems as if there is an arrow from the mount to that shape. But, the flow chart is somewhat confusing to me.

Thanks in advance

2 Megapixel Click on those cams and check under "accessories".

 

[Mike Mo]

They aren't listed under accessories when you go to the individual camera, but if you look at the flow chart link in my initial post they it seems to me that it may be compatible. I can't tell for sure, hence the confusion and post. I've screen clipped the relevant portions of the flowchart.

 

[jstabb]

To read that flow chart, start with the camera in question and then follow the arrows. Think of the lines as one way streets with the arrows indicating the direction of travel. The flow chart shows the HFW7 shape attaching directly to the PFA121 junction box. The PFB121W also attaches to the PFA121. But the HFW7 and PFB121W don't attach together.

 

[Mike Mo]

To read that flow chart, start with the camera in question and then follow the arrows. Think of the lines as one way streets with the arrows indicating the direction of travel. The flow chart shows the HFW7 shape attaching directly to the PFA121 junction box. The PFB121W also attaches to the PFA121. But the HFW7 and PFB121W don't attach together.

Thanks. That makes sense.

Anyone know of a similar type of mount compatible with the HFW5231 series then?