measured length run to switch one is 241 feet to the first netgear switch gs108pp that has 4 cameras on it including one DS-2DF8C842IXS-AELW two IPC-HFW7442H-Z4-X one IPC-B5442E-Z4E
on the other side of he driveway is is the same switch with 4 cameras. the first switch cut off after someone cut the cat 6 running to the camera at 1:45 am. I ran a new temp cable from the switch to use a that camera, replaced the switch and the POE injector to the speed dome but I could not get a feed from switch to the main switch in the house so I ran a cat 7 over the driveway and fed the first switch from the other line.e
my question is when testing the cables it says the first one is 250 feet longer than it is. so do I use a network booster ? pull the 4 cables out and pull in new shielded cables? the run is 140 feet of 3/4 grey pvc to a pull box than 80 feet to the gate column that has the opener and switch on it.
is this a good one range extender
on the other side of he driveway is is the same switch with 4 cameras. the first switch cut off after someone cut the cat 6 running to the camera at 1:45 am. I ran a new temp cable from the switch to use a that camera, replaced the switch and the POE injector to the speed dome but I could not get a feed from switch to the main switch in the house so I ran a cat 7 over the driveway and fed the first switch from the other line.e
my question is when testing the cables it says the first one is 250 feet longer than it is. so do I use a network booster ? pull the 4 cables out and pull in new shielded cables? the run is 140 feet of 3/4 grey pvc to a pull box than 80 feet to the gate column that has the opener and switch on it.
is this a good one range extender
As an Amazon Associate IPCamTalk earns from qualifying purchases.