what mount to use for a PTZ camera?

[wozzzzza]

i want to get a SD49225T-HN but what mount would i use to mount it to a 40mm square post??

 

[Tinman]

I believe this is the mount you would need....but it doesn't say what dia. of pipes it will fit ??

http://www.dahuasecurity.com/en/us/download/20160418ztqula.pdf

 

[wozzzzza]

how does the camera mount to that?? or does the camera come with the mount on the top when you buy it??? but not pictured in the website SD49225T-HN | Dahua Technology - Dahua Technology

 

[Tinman]

Never mind, I don't think this will go down small enough.

Model PFA150
General
Material SECC
Dimension 130.4mmx170mmx45mm(5.13”x6.69”x1.77”)
Mast Diameter 80~150mm(ɸ3.15”~5.91”)
Pipe Thread N/A
Operating Temperature -40ºC ~+60ºC(-40℉~+140℉)
Humidity 0~90% RH
Load Bearing 10.0kg(22.05lb)
Weight 1.1kg(2.43lb)
Applicable Model Please see “Accessory Selection”

 

[Tinman]

Here is a useful link to all the mounts:

http://www1.dahuasecurity.com/download/Accessory_Selection201703234.pdf

You might be able to make the PFA150 work with some modification.

 

[BillG]

how does the camera mount to that?? or does the camera come with the mount on the top when you buy it??? but not pictured in the website SD49225T-HN | Dahua Technology - Dahua Technology

It does.

 

[wozzzzza]

It does.

cool, if camera comes with this mount then that is all i need, i can easily weld a plate on the pole and screw this to it.
thanks.

 

[lgRich]

cool, if camera comes with this mount then that is all i need, i can easily weld a plate on the pole and screw this to it.
thanks.

No need to weld plate... just use 2 stainless steel clip pipe like this.

 

[wozzzzza]

that will work as well. being in high wind location i would prefer to weld a plate onto the square pole and screw the mount to it.