Zoneway Model NC649M-P hardwired ip camera

[Shaneacon]

Trying to figure out what setting i need for this camera , bi sees it but it does not give me any configuration settings
any help would be appreciated, on a side note ispy can configure it, i must be missing something.
bi just leaves it as a generic camera and h.264
thanks shane

 

[fenderman]

Trying to figure out what setting i need for this camera , bi sees it but it does not give me any configuration settings
any help would be appreciated, on a side note ispy can configure it, i must be missing something.
bi just leaves it as a generic camera and h.264
thanks shane

Welcome to the forum! try using the hosafe 1m option....make sure you enter the proper rtsp port and credentials...
If that doesnt work see this thread.
https://www.ipcamtalk.com/showthread.php/4099-How-to-add-camera-to-BI-that-is-not-in-the-drop-down-list

 

[Shaneacon]

Welcome to the forum! try using the hosafe 1m option....make sure you enter the proper rtsp port and credentials...
If that doesnt work see this thread.
https://www.ipcamtalk.com/showthread.php/4099-How-to-add-camera-to-BI-that-is-not-in-the-drop-down-list

fenderman,
thank yo so very much for the info
media stream (rtsp) port was 8554
changed bi port from 554 to 8554
added /live0.264 to path under video and up it came!!!

thank you
shane