New profile posts

hi team, Ive currently expanded 16ch Dahua XVR by adding 7x ip cams via poe switch. client asking to enable face recognition on one of the 8mp ip cam which im not able to select on the setup as its only giving me the option of the first 16 x hd cameras. Is that a no go option. cheers

Hi Andy, living in the Netherlands as well and I am looking for a Dahua like camera with wifi. What wifi model can you propose? I need something with a 3.6mm lens or better.
Tx

Hey Andy, for some reason I cannot send you PM. I'd like to buy 2x black version IPC-HDW5442T-ZE-S3. Can you give me quote and shipping to Europe? Thanks.

Dear Andy, I am also interested in two "EmpireTech IPC-Color4K-T 8MP 1/1.2" CMOS Full-Color Fixed-Focal Warm LED Turret Security" with 2.8mm lenses. Would you be able to instruct me, as I do live in The Netherlands as well.

Hi, I'm also having the exact same issue. Could you please send me the firmware?

Did you find an issue with the newer firmware? I'd be interested to know, because I just discovered the newer firmware after you posted.

Also, hopefully, you were able to find the firmware with the URL adaptation method I was talking about.

Greetings, I have a LaView LV-N9508Q8E which I am contemplating upgrading to Hik. Are you still around of the flash goes bad? Thanks!

Hi Andy, living in the Netherlands and would like to purchase the Dahua IPC-HDW5442T-ZE (S3 series). What's the procedure?

did you figure it out?

My camera was recording well last week Wednesday. The camera is motion detection enabled and where it is placed over looking at it kept on recording endlessly because the tv set of the recording. To stop this we applied privacy masking around the tv but since then the camera has stopped recording. we then removed the masking setting but the camera is still not recording. Can someone PLEASE help me with this

Hi Andy! I want to buy some cameras from you. Do you ship stuff to Sri Lanka? and have you before? Sending stuff here can be a bit challenging these days which is why I am asking.

Hi Andy.

I need at least 4 camera but I live in Europe. Does the the USA firmware affect something wrong in our area?

Hello!
I’ve had an RCA HSDB2 doorbell for 3 years without issues BUT this spring, we lost wifi for 2 days. When it came back online, I noticed no notifications after 10am each day. It records any movement/motion at all times but doesn’t list it as an “event” in the video screen after 10am. I’ve tried the reset it along with disconnecting for about 10 mins but nothing seems to help. Can anyone help?

I have a old IPCC 9610 which is now frozen. I would like to purchase a higher rec camera which one is the best value

I am SMM & SEO Services Provider, Search Engine Optimization Expert. i have all the knowledge about online work you can also hire me,
Please visit our site

Hey Andy, I purchased 3 SD4A425DB-HNY PTZ cameras from you last month. one of them appears to have a defective iris. I cannot go above 24 on one of the cameras, which is causing an image that is too dark at night. The other 2 cameras adjust from 0 to 100 just fine. I would like to exchange this camera for another one. My order number is EM20231263. Let me know how we should proceed.

Не оплакивай смертный, вчерашних потерь, день сегодняшний, завтрашней меркой не мерь, ни было ни грядущей минуте не верь, верь минуте текущей.

hello everyone, I'm new on here and have been playing around with ip cameras and blue iris software. that said i have been able to do most of the research already and had hit dead ends everywhere.
I recently purchased 4 "WiFi Smart Camera" i discovered that they are Shenzhen icomm with ANYKA processor. i need to flash the firmware and gain access to the ONVIF and RTSP ports, however i can not access the camera webpage to change any of the settings. the camera makes you use the Yi IoT app to setup the device via a cloud system. im trying to disable the cloud and put the camera on blue iris via RTSP

here is the log file from the camera i disassembled to find the chipset info.


[2023/11/19 12:56:18][cloud_demo.c: sync_time(): 2242] yi_sync_time ok!
get net info:ip: 192.168.1.xxx, mask: 255.255.255.0, route: 192.168.1.1, dns1: 192.168.1.1, dns2: 8.8.8.8
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1476 errors:0 dropped:0 overruns:0 frame:0
TX packets:1476 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:85689 (83.6 KiB) TX bytes:85689 (83.6 KiB)

wlan0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
inet addr:192.168.1.xxx Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:33 errors:0 dropped:2 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6274 (6.1 KiB) TX bytes:2811 (2.7 KiB)

wlan0 IEEE 802.11abgn ESSID:[Not For Your Eyes]
Mode:Managed Frequency:5.785 GHz Access Point: XX:XX:XX:XX:XX:XX
Bit Rate=30 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=70/70 Signal level=-27 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3 Missed beacon:0


[global]
user = admin
secret = admin
dev_name = 小K互联网摄像机
soft_version = 2000
uid_name = danale.conf

[ethernet]
dhcp = 1
ipaddr = 192.168.1.xxx
netmask = 255.255.255.0
gateway = 192.168.1.1
firstdns = 8.8.8.8
backdns = 108.108.108.108

[wireless]
ssid = [Not For Your Eyes]
mode = Infra
security = 3
password = [Not For Your Eyes]
running = softap

[softap]
s_ssid =
s_password =

osd_name = AKWIPC0000000010

Hik Connect with default server is slow. Hi everyone, I recently purchased hikvison accusense NVR with 8 channnels. I have four IP cameras of different Chinese vendors. When I use hik connect, it takes more than 10 seconds to load the video. I am in "fluent" mode in the app. I believe the issue is because the server is loaded. I want to setup my own server in a computer I have at home. I am trying to use ivms 4200 lite but the "activate" button is greyed. Is that possible with lite? Any idea if I can set it up? I could use either Windows or Linux. Any guides out there?
Thanks,
Eli