New profile posts

Good day, how do i reset password of my IP camera hikvisioN
DS-2CD1023G0-I20180326AAWR203111413
4443764287
4443764287
Quitar contraseña de mi dvr mod 588460880
CCTV SURVEILLANCE
CCTV SURVEILLANCE
Use the SADP tool, select the camera you want to change the pw on. Click forgot pw and follow the steps on screen. You’ll have to email a file to your support rep/vendor and they will send you back a file to import and this will allow you to reset the PW.

if you can access the camera, there might be a “reset button” on the camera board. Leave the camera plugged in (powered) and hold the button for 30 seconds. It should be defaulted to factory settings afterwards.
CCTV SURVEILLANCE
CCTV SURVEILLANCE
Looking for anyone well versed with the following items:
My Set Up
Dahua Smart PSS software
18- Dahua 8mp night color bullet cams
4- Dahua 4megapixel LPR 10-40mm network cams
32CH-EPOE NVR 4K

That would want to be compensated for teaching me how to use the features of Smart PSS software. Its up and running but the amount of money invested in the set up I would love a full walkthrough or overview on how it all works. I know basics just enough to be dangerous with it but still not as much as I'd like. If anyone would be willing to assist there would be a fair compensation.

Thanks in advance.
CCTV SURVEILLANCE
CCTV SURVEILLANCE
What Smart PSS functions are you looking to use. I assume Live and Playback are already know. The only features I’d suggest useful for CCTV would be the Events menu. Which will pop up a window and audible announcements (on your desktop/laptop). Unless you have a Dahua alarm system or Access controller the other features of the PSS software would not pertain to your camera use of the software.
The Events (Alerts) are useful but can get annoying if not setup correctly (motion/area, sensitive, IVS etc.)
Hi - I'm looking for indoor and outdoor cameras to integrate with Blue Iris. Can you recommend the best model for night, for identifying small items? The cameras are for tracking my cats (I have 4), so if there is a small amount of vomit, I need the camera to be able to see it clearly (usually I would scan the footage to see when the vomit appeared, and which cat did it). I also need to be able to zoom in on food dishes to ensure everyone has eaten - that sort of thing. So I need very good clarity, especially at night, with the focus being on small pets rather than people/cars/security.

Also, I need it shipped to Spain.

Thanks
Karen
שלום לכולם מישהו יכול לעזור
יש לי מצלמות (PROVISION ISR)
הדירה שלי נפרצה לא מזמן
ואני מנסה לתקן את חיבורי המצלמה??
nisoo22
nisoo22
שלום לכולם מישהו יכול לעזור
יש לי מצלמות (PROVISION ISR)
הדירה שלי נפרצה לא מזמן
ואני מנסה לתקן את חיבורי המצלמה??
Hello, i would like to know if you can give me the firmware for DH-SD49425XB-HNR camera so i could use auto track.
Hope to hear from you,
thank you
andy, i am looking for some sort of horn, siren, or speaker ( 2 way would be a plus) to mount in my carport so when i see something going on that should not be happening, i can honk the horn, play a pre-recorded sound, or just let the siren go for a few seconds to scare off the people that keep wandering onto my property while i am not there. basically when i get an alert from BI, i can punch the "oh crap" button and maybe it will scare them into just leaving instead of staying around and taking things that they want more than me. i have plenty of POE ports available. thanks in advance.
frustrated...I keep getting an error of death, and I have 3 of 4 camera that stopped recording at random intervals the last 3 months. I need someone to remote access in to fix this crap...have no idea what i AM DOING
TonyR
TonyR
This apparently is a "profile" post. In order to increase the chances of a helpful response I suggest you re-post it, with the addition of relevant NVR and/or IP camera info such as make(s) and model(s), in the more appropriate section, such IP Cameras or NVR's, DVR's & Computers.
  • Like
Reactions: Mike
I have the same NVR and I have newer firmware: 3.210.Private 02.0., build: 2017-04-26 (V7.0.3)
You can have it if you want. I have probably saved the bin file. Let me know.
New here, need help posting, please look for my post/profile. Thanks
M
mohammed abdul ahad
HI..i hav a care cam wifi camera,model- wifi-tf-ptx-10x,its a new product it installed correctly,but it restart every few minutes...solution plz
I just became a member, I clicked on profile posts,I think, so I'm typing on the update your status screen. So how and where do I post something about home security systems? What I'm looking for may not exist, but it should. Wire free (I already know what everyone says about battery operated camers), Live monitoring, no recording needed, wireless non wifi, no internet, no vnr, with at least a 10" or 12"monitor. I do not want to lose any bandwith, because I use a Centurylink landline, with DSL, and it's iffy all the time, Plus where I want it to work is inside (monitor) and outside (camera/s) a metal building. I've looked for weeks for something like I'm talking about, and it is simple enough, it shouldn't cost and arm and a leg. I know everyone will say hard wire it, but I don't want to cut a hole in my metal building.
hello andy I would need help about a ptz 6al433xa I updated the firmware found on the site dahua DH_SD-Prometheus_MultiLang_NP_Stream3_V2.812.0000032.2.R.220804 after the reboot I reported the standard settings but when I enter with the web page I have no video streaming. while through nvr or pss everything works. I state that I use ie11 and install the webrec but I do not see anything.
I noticed that on the information page of the cam the web version is v3.2.1.1283440p9 while when I download plugin activex the version is v3.3.192509.0.can this be the problem?
I
iveco300
small criticism but before releasing updates dahua does not check if they work ??
E
EMPIRETECANDY
You just make factory default to the PTZ and test again.
I
iveco300
hello I maybe understood the problem I restored connected directly to the cam with the pc then I entered the webgui and it worked. when i reconnect the cam to the nvr the problem comes up again so i think it is nvr's fault it seems almost a security lock with https certificates.
Hikvision DS-7104HGHI-F1 need to recover admin password! I tried all methods on internet. Nothing works. Hikvision support is still not replied!
C
c1188
C
c1188
Saludos. ¿Tengo forma de comunicarme con asesor de manera telefonica para paso a paso seguir el reset
? ¿Algún telefono?
C
c1188
Y baje el archivo que me enviaste y baje el vídeo se contradicen EL vídeo dice me connect a
  • https://www.hikvision.com/es/Auxiliary-column/Privacy-Policy
  • Dicho sitio dice "Lamentamos que no este funcionando adecuadamente" Y me dice de un click en una liga la liga no coincide con el vídeo
  • Veo el video dice me conecta via
    • lsgp.hik-proconnect.com/#/basic/sitio
    • mision no existe
  • Voy a la herramienta que deje abierta de SADP e importo el archivo que me enviaste doy nueva contraseña
  • no hace nada
  • VOy al Smart DVR y Entro a Menu para poner usuario admin y Contraseña que acabo de poner en el SADP indica
    • Contraseña incorrecta. Todavía tienes 6 oprotunidades. Intentelo de nuevo.
¿Que recomiendas? O mejor aún ¿se puede habalr directamente con el de soporte vía telefonica para hacerlo paso a paso?
The files that I labeled for training are zipped up and you can download them by just clicking on this zip file link:
Please let me know once you have them and I'll remove the file from my server.

I should note that I included a few images which are NOT labeled because the plate isn't visible. I was assuming that it would be good for the model to have an example of a model that does not include the plate, but that's purely an assumption by me. If that's not valid, then it's clearly fine to ignore the few images without a corresponding text file. If you find anything about this which isn't ideal or perfect, don't hesitate to ask me to re-do any or all of the labeling.

Thank you for all you've done for everyone!
MikeLud1
MikeLud1
I just downloaded the zip so you can remove the file from my server. I will be updating the model in about a week or two.
C
c1188
Saludos. Se fue la luz en mi localidad. ¿Puedes re-enviarme el código?
C
c1188
Hi Andy,

I bought an IPC-T2431T-AS camera in June 2021 and have been pleased with it. Yesterday, it stopped broadcasting video. I can still log into the camera and access settings, but no video. I have checked all connections, rebooted, still no video. Is the camera still under warranty?
Dear Team, I am working on HIKVISION cctv cameras a corporate LAN. They have remote branches and want the cameras footage recorded in the HQ. At the HQ, I have an NVR with 24 HDD ( Ds- 96128NI ), large capacity. I also have Hik-Central VMS. My question is, can I use the NVR as a Network Attached Storage ( NAS ). That is configure the Hik-central application to a PC as Server, and then Use the NVR as NAS?
Hey, few questions about NVR, can your NVR work with Dahua cameras and vice versa?
I heard that NVRs + external PoE switch is more reliable and considered better than NVR with a built in switch, is that correct?
What is a good 16ch NVR (with or without PoE depending on the previous answer), with analytics, and connections to HDD, alarm and external display?
thx!
Andy, I have a few IP8M-2439EW Amcrest cams outside now. They are OK but in two locations I would like to get a bit better low light performance (the two that cover the driveway and outside parking area. Would like to do that without breaking the bank. What would you recommend? Plan on re-purposing the Amcrests to the basement.
Top