I'm not able to share my cam. The app YOOSEE generates the following link to share, but something doesn't works. Can somebody try to connect and tell me if it my foult or the generate link is uncorrect? Thanks
sorry to contact you directly. I hate to ask but i just cant get my head around YOLOv5 6.2 using the ipcam-combined model. Ive searched and im still stumped. any suggestions you could offer would save me a few gray hairs.
Hi all, I need some assistance please. I have installed the Dmss HD app on my phone and connected it to the cameras. I would like to register and I understand how to do this. But on the screen where I put my email address and password with some hassle, I then cannot continue further as my screen doesn't want to move up so I can tick the box to agree to the lisence and agreement. It is as if the settings are wrong and the screen is to "small". Thanx
Hi Andy,
after updating DH_NVR5XXX-4KS2 NVR to firmware V4.002.0000000.6.R.221115
IVS push notifications stop working, tried multiple factory resets, DMSS reinstallations, can't downgrade to older firmware, do you have a working firmware for it?
Hi Andy, Could I connect a doorbell from another brand which is connected via wifi to my lan to the NVR? SOmething like Reolink Video Doorbell WiFi ? This can be used to their own NVR but Do not want a 2nd NVR
Or is tehre a good not exensive DAHUA alternative taht I can connect via Wifi to the NVR? It is impossible to get RJ45 to the bell location. Therre are only two wires that I could use as power source
IK heb even gekeken
Ik heb op dit moment 4 camera's
Op cam 1 heb ik 2 triwires
cam2 heb ik er 3
cam3 ook 3
can 4 ook 3
Het gekke is dat bij cam 3 gewoon alle 3 tripwires actief kan hebbenen wijzigen en dat dat iik netjes na OK verwerkt wordt.
dit terwijl ik bij elke wijziging die ik op CAM1 probeer die de melding reached maxcapability en dat verandert niet als ik er bijcam 3 1 uitschakel
hi friend,
i have a vth1550ch-s2 and i flashed it with the wrong firmware same as you,
The problem was caused by flashing:
DH_VTHX421H_MultiLang_SIP_V4.410.0000000.4.R.20200221.bin
instead of
DH_VTHX421L... which is for this device.
and know its bricked, i can get any connexion working on it in NCOM or Putty or tftp server only a black screen and the red led of the power on the device, plz sir did you found any solution because i saw you have being in the same probleme before me.
No one will see your post here as a profile post. You should re-post in the correct section, called "IP cameras".
The link in the image you states there are 3 steps to perform including for them to download and install the app on their phone. Maybe they are not performing all 3 steps.