New profile posts

Hello Andy
I'm looking for 4pcs IPC-T5442T-ZE in Europe.
2 roof mount junction boxes
2 wall mounts
short shipping time (hoping to have them within a week).
Then possibly some other things if it wont delay shipping (weatherproof RJ45 for my cables, maybe some indoor cams, are the Amcrests ptz on sale any good or is SD1A404XB-GNR much better?).
Please advice on shipping time and cost for above listed 4x T5442T-ZE + 4 mounts.
Hi, have a new install and was looking for your PTZ cameras but none on the aliexpress page. Need minimum 30x but 45 would be better. Will also need a good NVR to connect to it. Client would like AI features like human identification and vehicle, licence plate capture would be a plus. Need all the hardware for mounting camera on the corner of the building in Canada climate.
E
EMPIRETECANDY
Hi Jack

Just send you a DM for further talking.

Andy
Hello! It's been a while!

I'm planning on upgrading my system and was curious if you are still selling Dahua gear. If so, I'll like to work with you to get a new NVR and some 180 cams and a plate reader.

Hope all is well on your side and you aren't getting too much smoke up there!

Thanks
Mike
W
walter shiole
hey i need assistance here on this dvr serial password reset DS-7204HGHI-F10420160413AAWR590631134WCVU
W
walter shiole
please help
vector18
vector18
Sorry I don’t have any Dahua stuff
hello do you have any of the new hikvision smart light (dual led) camera? if yes which model and price? thanks!
E
EMPIRETECANDY
Do you have any models interested?
S
Spirch
i am not sure yet but it would be a 4mm or varifocal and 6mp or 8mp

I will list the model but like I said I am not certain yet which one, it's hard to find the price of these so the first thing is figuring out if i can afford it

2CD2087G2H
2CD2387G2H
2CD2687G2HT
2CD2787G2HT

2CD2067G2H
2CD2367G2H
2CD2667G2HT
2CD2767G2HT
Andy, can you tell me if I can use one of your model IPC-T5442T-ZE cameras on my Lorex N841 NVR? I need about 4x and the lower light ability of that camera. I intend to build up a Blue Iris system in the near future but it would be nice to keep the Lorex running with the better camera until I can get my net cables in place. Thanks for your help.
E
EMPIRETECANDY
Yes, no problem, just add the camera via onvif protocle.
TonyR
TonyR
@OdCh ,
No one will see your post here as a profile post. You should re-post in the correct section, called "IP cameras".

The link in the image you states there are 3 steps to perform including for them to download and install the app on their phone. Maybe they are not performing all 3 steps.
sorry to contact you directly. I hate to ask but i just cant get my head around YOLOv5 6.2 using the ipcam-combined model. Ive searched and im still stumped. any suggestions you could offer would save me a few gray hairs. :-)
Hi all, I need some assistance please. I have installed the Dmss HD app on my phone and connected it to the cameras. I would like to register and I understand how to do this. But on the screen where I put my email address and password with some hassle, I then cannot continue further as my screen doesn't want to move up so I can tick the box to agree to the lisence and agreement. It is as if the settings are wrong and the screen is to "small". Thanx
Hi Andy,
after updating DH_NVR5XXX-4KS2 NVR to firmware V4.002.0000000.6.R.221115
IVS push notifications stop working, tried multiple factory resets, DMSS reinstallations, can't downgrade to older firmware, do you have a working firmware for it?

Thanks
Hi Andy, Could I connect a doorbell from another brand which is connected via wifi to my lan to the NVR? SOmething like
Reolink Video Doorbell WiFi ? This can be used to their own NVR but Do not want a 2nd NVR
Or is tehre a good not exensive DAHUA alternative taht I can connect via Wifi to the NVR? It is impossible to get RJ45 to the bell location. Therre are only two wires that I could use as power source
IK heb even gekeken
Ik heb op dit moment 4 camera's
Op cam 1 heb ik 2 triwires
cam2 heb ik er 3
cam3 ook 3
can 4 ook 3
Het gekke is dat bij cam 3 gewoon alle 3 tripwires actief kan hebbenen wijzigen en dat dat iik netjes na OK verwerkt wordt.
dit terwijl ik bij elke wijziging die ik op CAM1 probeer die de melding reached maxcapability en dat verandert niet als ik er bijcam 3 1 uitschakel
Hi Sorry ik had hgeenmelding van je antwoord gekregen:(
Ik heb 5 tripwires
Color4K T180 keeps freezing and losing signal
B
babyjames10
I recently install a Color4k T180 and it keeps freezing and losing signal. It's updated to the most recent firmware. I have a hikvision 180, 2 Color4k-x, 2 Color4k-T, and a 5442. 10 cameras in all running on 2 poe switches. This is the only camera I'm having a problem with.