New profile posts

Hi, I have the same DH-SD49425XB-HNR camera and I have a problem with auto tracking (this option is not in the software) do you have a firmware version for this camera to activate it?

Hi, I have the same DH-SD49425XB-HNR camera and I have a problem with auto tracking (this option is not in the software) do you have a firmware version for this camera to activate it?

Hello Andy
I'm looking for 4pcs IPC-T5442T-ZE in Europe.
2 roof mount junction boxes
2 wall mounts
short shipping time (hoping to have them within a week).
Then possibly some other things if it wont delay shipping (weatherproof RJ45 for my cables, maybe some indoor cams, are the Amcrests ptz on sale any good or is SD1A404XB-GNR much better?).
Please advice on shipping time and cost for above listed 4x T5442T-ZE + 4 mounts.

850bd7

Hi, have a new install and was looking for your PTZ cameras but none on the aliexpress page. Need minimum 30x but 45 would be better. Will also need a good NVR to connect to it. Client would like AI features like human identification and vehicle, licence plate capture would be a plus. Need all the hardware for mounting camera on the corner of the building in Canada climate.

Hello! It's been a while!

I'm planning on upgrading my system and was curious if you are still selling Dahua gear. If so, I'll like to work with you to get a new NVR and some 180 cams and a plate reader.

Hope all is well on your side and you aren't getting too much smoke up there!

Thanks
Mike

hello do you have any of the new hikvision smart light (dual led) camera? if yes which model and price? thanks!

Andy, can you tell me if I can use one of your model IPC-T5442T-ZE cameras on my Lorex N841 NVR? I need about 4x and the lower light ability of that camera. I intend to build up a Blue Iris system in the near future but it would be nice to keep the Lorex running with the better camera until I can get my net cables in place. Thanks for your help.

Hi andy. I am looking for 4, 8, 16, and 32 channel dahua nvr price.

Proud Afghan American

Afghan American, came as a refugee and proud American now.

I'm not able to share my cam. The app YOOSEE generates the following link to share, but something doesn't works. Can somebody try to connect and tell me if it my foult or the generate link is uncorrect? Thanks

sorry to contact you directly. I hate to ask but i just cant get my head around YOLOv5 6.2 using the ipcam-combined model. Ive searched and im still stumped. any suggestions you could offer would save me a few gray hairs.

Hi, can anyone help me how to factory reset hikvision camera, ds-2cd1321d-i model

Hi all, I need some assistance please. I have installed the Dmss HD app on my phone and connected it to the cameras. I would like to register and I understand how to do this. But on the screen where I put my email address and password with some hassle, I then cannot continue further as my screen doesn't want to move up so I can tick the box to agree to the lisence and agreement. It is as if the settings are wrong and the screen is to "small". Thanx

Hi Andy,
after updating DH_NVR5XXX-4KS2 NVR to firmware V4.002.0000000.6.R.221115
IVS push notifications stop working, tried multiple factory resets, DMSS reinstallations, can't downgrade to older firmware, do you have a working firmware for it?

Thanks

Hi Andy, Could I connect a doorbell from another brand which is connected via wifi to my lan to the NVR? SOmething like
Reolink Video Doorbell WiFi ? This can be used to their own NVR but Do not want a 2nd NVR
Or is tehre a good not exensive DAHUA alternative taht I can connect via Wifi to the NVR? It is impossible to get RJ45 to the bell location. Therre are only two wires that I could use as power source

HII..need some help with hikvision ANPR for barrier open and close project..

IK heb even gekeken
Ik heb op dit moment 4 camera's
Op cam 1 heb ik 2 triwires
cam2 heb ik er 3
cam3 ook 3
can 4 ook 3
Het gekke is dat bij cam 3 gewoon alle 3 tripwires actief kan hebbenen wijzigen en dat dat iik netjes na OK verwerkt wordt.
dit terwijl ik bij elke wijziging die ik op CAM1 probeer die de melding reached maxcapability en dat verandert niet als ik er bijcam 3 1 uitschakel

Hi Sorry ik had hgeenmelding van je antwoord gekregen
Ik heb 5 tripwires