Is there a mask to get the trim back onto a HIKVISION turret?

MrRalphMan

MrRalphMan

Getting the hang of it
Jan 20, 2016
309
72
Is there a trick to get the trim back onto a HIKVISION turret?

Ok, I feel really dumb now, but I cannot get the round trim ring back on my turret camera.
It should just sit on and turn to the right (clockwise) but it won't budge.

Is there a trick to this?

Paul

Sent from my Nexus 10 using Tapatalk
 
Last edited by a moderator:
Apologies for the bump, but I'm embarrassed that I cannot complete the installation.
 
MrRalphMan said:
Apologies for the bump, but I'm embarrassed that I cannot complete the installation.
Click to expand...

You over tightened the screws when you mounted the camera to the surface its fixed to. SLIGHTLY losen the 3 screws that you put in to mount the camera, don't loosen them so much that the camera wiggles but loosen them just enough to let it drop ever so slightly away from the surface. That mud ring sits just slightly above the metal surface mount and when you over tighten the screws the ring can not slid above the mount and lock.
 
Ok went up the ladder in the Dark tonight and.... still cannot get the bugger on.
When I have a little more time and some daylight I'll take the camera off the Mount and do it down on the ground..
 
Taken the camera down and tried it to no avail. The lugs on the cover are slightly scuffed, but nothing looks bent/broken. If I release the camera from the mount cover completely I can get it to go on, but other then that..
 
MrRalphMan said:
Apologies for the bump, but I'm embarrassed that I cannot complete the installation.
Click to expand...
Don't be embarrassed I did the same thing my first hikvision I sat their and messed with it for 15 minutes. Once I figured it out I felt like a jack ass. ;)
 
Camit said:
Don't be embarrassed I did the same thing my first hikvision I sat their and messed with it for 15 minutes. Once I figured it out I felt like a jack ass. ;)
Click to expand...
How did you resolve it as I'm still puzzled.
 
You must log in or register to reply here.
Top Bottom