After Downgrading and changing the mtdblock5 / mtdblock6, the camera (DS-2CD2632F-IS) was working correctly.
Later I tried to upgrade the camera to 5.3.0.
Since that, I can’t connect to the camera.
In the log of Whireshark is no network-connectivity of the camera (connected to a switch or with a crossover cable).
Now I want connect the camera with a serial cable.
I'm not sure where the correct connector on the camera is!
![2CD2632_2b.jpg](/data/attachments/14/14569-e237a393e8966f0d09e0f0dc1a500a2d.jpg)
Is the connector on the photo the correct one? If so, what is the cable assignment?
DS-2CD2632F-IS 2,7-12mm
Sticker: V5.3.0_150513 (07/2015)
Later I tried to upgrade the camera to 5.3.0.
Since that, I can’t connect to the camera.
In the log of Whireshark is no network-connectivity of the camera (connected to a switch or with a crossover cable).
Now I want connect the camera with a serial cable.
I'm not sure where the correct connector on the camera is!
![2CD2632_1a.jpg](/data/attachments/14/14568-7ebbf412a57196147c1d7689e5967cc7.jpg)
![2CD2632_2b.jpg](/data/attachments/14/14569-e237a393e8966f0d09e0f0dc1a500a2d.jpg)
Is the connector on the photo the correct one? If so, what is the cable assignment?
DS-2CD2632F-IS 2,7-12mm
Sticker: V5.3.0_150513 (07/2015)
Last edited: