I have read through a lot of the threads on here and still can't seem to figure out my issue. I am attempting to add a camera to my BI system. I can access the camera on my laptop by visiting the cameras IP address and putting in the credentials. When I attempt to add the camera to BI I put click the find/inspect button and receive the below info. When I click OK to save the camera (like I have done on other cameras) I get a RTSP: 404 Not Found.
I am running a PC based system with Windows 10.
I have my computer plugged directly into the router.
Ther router running to a POE switch and the cameras hooked into the POE.
I have 11 other mixed brandes (Dahua, Hikvision) running on the system and have set them up the same way.
Any help would be appreciated.
Here is the find/inspect results:
Opening 192.168.1.61 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2018-02-10T20:39:15.000Z
Requesting device information...
Manufacturer: JVC KENWOOD
Model: VN-H257VP
FirmwareVersion: 6.01.006
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
Has Event services: /onvif/event_service
Has WSPullPointSupport
RelayOutputs: 2
InputConnectors: 2
Has Device IO services: /onvif/deviceio_service
AudioOutputs: 1
Has PTZ service: /onvif/ptz_service
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
I am running a PC based system with Windows 10.
I have my computer plugged directly into the router.
Ther router running to a POE switch and the cameras hooked into the POE.
I have 11 other mixed brandes (Dahua, Hikvision) running on the system and have set them up the same way.
Any help would be appreciated.
Here is the find/inspect results:
Opening 192.168.1.61 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2018-02-10T20:39:15.000Z
Requesting device information...
Manufacturer: JVC KENWOOD
Model: VN-H257VP
FirmwareVersion: 6.01.006
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
Has Event services: /onvif/event_service
Has WSPullPointSupport
RelayOutputs: 2
InputConnectors: 2
Has Device IO services: /onvif/deviceio_service
AudioOutputs: 1
Has PTZ service: /onvif/ptz_service
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done