External microphone/speakers for DAHUA cameras
- Thread starter dana2
- Start date
I'm using three of these with good results. Tried a lower cost one that wasn't very good. Performance is roughly similar to the built in mic in my turret cams.
Microseven IP Cameras
Microseven IP Cameras
Ahh, now I realize, one needs external power for these "
I was planning to do everything over POE, guess that is not possible
I was planning to do everything over POE, guess that is not possible
awsum140
Known around here
@awsum140 Hmm I cannot seem to find POE splitters that would still provide POE while also providing power as well. The ones I can seem to find on flea bay and Amazon are like totally splitting the POE cable into power and non-poe Ethernet. This means I still have to run 2 cables to the camera. Might as well be power + POE cable rather than 2 POE cables.
awsum140
Known around here
looney2ns
IPCT Contributor
awsum140
Known around here
I'm not ignoring you, Looney. It's been a really busy day. Among other things had the "pleasure" of driving into downtown Philly and then leaving at prime commute time. Trip home took two hours when a normal time would be, at most, 45 minutes.
awsum140
Known around here
@looney2ns OK. Got a few minutes to look at what I originally bought. I'm using one of these, at the moment, to power a 7 watt IR and a Dahua 4231EM-ASE. https://www.amazon.com/gp/product/B077982XCS/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1 It is rated at 1 amp output and has been doing fine for almost a year now.
In the future, if I ever need one again, I'll probably order this one https://www.amazon.com/USG-Splitter...R6Q3XPY2QRR1H8Q7&pd_rd_w=9H5fN&pd_rd_wg=z31HC It has, supposedly, a two amp output which would give more "head room" for the camera and accessories.
Easiest way is to plan ahead and pull extra CATx cables so you never need to use one. They are kind of big and hard to stuff into a four inch round, weatherproof, box. They fit fine in a four in square, though, because it can go in diagonally.
I've also used long DC extension cables to power IR lights which lets me keep the wall warts remotely mounted in the "server room/office". Just be sure to use a gauge of wire that is appropriate for the load.
In the future, if I ever need one again, I'll probably order this one https://www.amazon.com/USG-Splitter...R6Q3XPY2QRR1H8Q7&pd_rd_w=9H5fN&pd_rd_wg=z31HC It has, supposedly, a two amp output which would give more "head room" for the camera and accessories.
Easiest way is to plan ahead and pull extra CATx cables so you never need to use one. They are kind of big and hard to stuff into a four inch round, weatherproof, box. They fit fine in a four in square, though, because it can go in diagonally.
I've also used long DC extension cables to power IR lights which lets me keep the wall warts remotely mounted in the "server room/office". Just be sure to use a gauge of wire that is appropriate for the load.
As an Amazon Associate IPCamTalk earns from qualifying purchases.