Recent Purchase Question - Dahua Consumer Line A46

Dunn

n3wb
Joined
Jan 13, 2018
Messages
28
Reaction score
8
Hi Andy,

Just got the IPC-A46 setup today; the only issue I'm having is that the smart tracking is not working properly. I have it mounted on the ceiling and therefore I toggled the screen flip setting. Because of this, the smart tracking is actually moving away from the movement instead of towards it. The auto-track setting is practically non-functional because of this. Any fixes for that? If not, any other way to add my own motion detect tours/tracking? Can't seem to get SmartPSS or Dauha Config tool to make any changes to the PTC settings due to the permissions/access issues on the camera side of things.


Thanks,
Dunn
 

Dunn

n3wb
Joined
Jan 13, 2018
Messages
28
Reaction score
8
Auto tracking is a gimmick... Forget it exists.. place the camera in the area of the room that will allow it to capture the entire room..
I did, it’s in a good spot, I was more or less hoping there was a fix to the feature so I could check out the feature myself. Seems spastic at best but not working properly at all in the flip mode.
 

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
15,521
Reaction score
22,657
Location
Evansville, In. USA
I did, it’s in a good spot, I was more or less hoping there was a fix to the feature so I could check out the feature myself. Seems spastic at best but not working properly at all in the flip mode.
See my review, it acted the same for me.
 
Top