I recently purchased a NVR (7616NI-E2/8P) with "AARR" in its serial number. The NVR has the firmware version of 3.0.10. I have three cameras on the local network. All three cameras are on motion detection and two of the cameras have recording, but one does not.
The following is a portion of the NVR's log file.
659 | 8/15/2016 9:12 | Alarm | Stop Motion Detection | D9 |
660 | 8/15/2016 9:12 | Alarm | Stop Motion Detection | D10 |
661 | 8/15/2016 9:12 | Alarm | Start Motion Detection | D10 |
662 | 8/15/2016 9:12 | Alarm | Start Motion Detection | D9 |
663 | 8/15/2016 9:12 | Alarm | Stop Motion Detection | D10 |
664 | 8/15/2016 9:12 | Information | Stop Recording | D10 |
665 | 8/15/2016 9:13 | Alarm | Stop Motion Detection | D9 |
666 | 8/15/2016 9:14 | Alarm | Start Motion Detection | D9 |
667 | 8/15/2016 9:14 | Alarm | Stop Motion Detection | D9 |
668 | 8/15/2016 9:20 | Alarm | Start Motion Detection | D11 |
669 | 8/15/2016 9:20 | Information | Start Recording | D11 |
670 | 8/15/2016 9:20 | Alarm | Stop Motion Detection | D11 |
671 | 8/15/2016 9:21 | Information | Stop Recording | D11 |
672 | 8/15/2016 9:21 | Alarm | Start Motion Detection | D11 |
673 | 8/15/2016 9:21 | Information | Start Recording | D11 |
674 | 8/15/2016 9:21 | Alarm | Stop Motion Detection | D11 |
675 | 8/15/2016 9:21 | Alarm | Start Motion Detection | D11 |
676 | 8/15/2016 9:21 | Alarm | Stop Motion Detection | D11 |
677 | 8/15/2016 9:21 | Information | Stop Recording | D11 |
Note that D9 (DS-2CD3132-I) shows "Alarm Start Motion Detection" and "Alarm Stop Motion Detection", but no "Information Start/Stop Recording".
My other cameras are D10 (DS-2CD3132-I) and D11 (DS-2CD2632F-IS).
Please help.