observant1
Pulling my weight
NSW2010-16T2GC-POE-IN-BA is Gigabit uplink Unmanaged Switch -
Very large building. 1 NVR with 2 nic's. 1 nic to the wan. 1 nic for the cameras. 5 total switches. two switches 300 ft in different locations, feeding two other switches 300 ft further in different locations. 1 Switch at the same location as the NVR. So I'd go from the NVR to an uplink port on the 1st switch - to feed cameras and the 4 other switches, or Should I add a gigbit switch from the 1st switch's uplink port (because the other uplink port goes to the NVR) in order to have two gigabit links to the 4 switches in the field - (so to speak) in order to avoid using a regular 100mbt port to feed another two switches?
The switches have two, gigabit uplink ports and 16 poe @ 100mbt ports.
Very large building. 1 NVR with 2 nic's. 1 nic to the wan. 1 nic for the cameras. 5 total switches. two switches 300 ft in different locations, feeding two other switches 300 ft further in different locations. 1 Switch at the same location as the NVR. So I'd go from the NVR to an uplink port on the 1st switch - to feed cameras and the 4 other switches, or Should I add a gigbit switch from the 1st switch's uplink port (because the other uplink port goes to the NVR) in order to have two gigabit links to the 4 switches in the field - (so to speak) in order to avoid using a regular 100mbt port to feed another two switches?
The switches have two, gigabit uplink ports and 16 poe @ 100mbt ports.