Hello All!
I have DS-7616NI-K2/16P but it is bricked.
I have been trying to update firmware by serial/TFTP to different versions old and new but nothing has changed. but I'm stucked because sth is wrong I believe at Bootloader level.
I have permanent message:
"Verifying RSA ... Bad Data RSA verify
ERROR: can't get kernel image!"
Can you take a look into log and advice what to do?
Thanks a lot!
I have DS-7616NI-K2/16P but it is bricked.
I have been trying to update firmware by serial/TFTP to different versions old and new but nothing has changed. but I'm stucked because sth is wrong I believe at Bootloader level.
I have permanent message:
"Verifying RSA ... Bad Data RSA verify
ERROR: can't get kernel image!"
Can you take a look into log and advice what to do?
Thanks a lot!
Code:
U-Boot 2010.06-svn20427 (Mar 09 2018 - 16:41:25)[V1.4.5]
Hit ctrl+u to stop autoboot: 0
Mounting yaffs2 mount point/partnum: nand/0
Configures yaffs mount nand success!
Copy /nand/uImage to 0x42000000... [DONE]
timeout for link [4999]!
MAC: F8-4D-FC-E7-F2-B7
|RCV UDP pack timeout| TFTP server not found
## Booting kernel from Legacy Image at 42000000 ...
Verifying RSA ... Bad Data RSA verify
ERROR: can't get kernel image!
Mounting yaffs2 mount point/partnum: nand1/1
Delete part:flash_sys0 nand/version.bin
Configures yaffs mount nand1 success!
Copy /nand1/uImage to 0x42000000... [DONE]
## Booting kernel from Legacy Image at 42000000 ...
Verifying RSA ... Bad Data RSA verify
ERROR: can't get kernel image!
This program will upgrade software.
***
ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY! *
Don't reset machine,or anything that interrupt it. *
The upgrade process must finish in 10 minutes! *
If this program fails,machine might be unusable, *
and you will need to reflash again. *
If you find this too risky,power off machine now. *
***
Now press [u/U] key to upgrade software: