Check the box near lower right entitled "Get ONVIF trigger events", then click on button upper right "Find/Inspect".My question is, the ONVIF source, what should be here to get the onvif triggers from the c210 if anyone knows?
I get this....Check the box near lower right entitled "Get ONVIF trigger events", then click on button upper right "Find/Inspect".
Anyone got the audio working?Opening 192.168.0.27 port 80...
HTTP Get / request...
Failed with HTTP 12029
Opening 192.168.0.27 port 2020...
ONVIF GetSystemDateAndTime
2024-06-27T19:04:26.000Z
Requesting device information...
Manufacturer: tp-link
Model: Tapo C110
FirmwareVersion: 1.3.7 Build 230823 Rel.57279n(5553)
GetCapabilities...
Querying services
Has Imaging services: /onvif/service
Has media services: /onvif/service
Has RTP_RTSP_TCP, requesting profiles
profile token profile_1
profile name mainStream
profile source is raw_vs1
profile source config is vsconf
profile token profile_2
profile name minorStream
profile source is raw_vs1
profile source config is vsconf
requesting URI for profile profile_1
RTSP URI: /stream1
requesting URI for profile profile_2
RTSP URI: /stream2
Has Event services: /onvif/service
Has WSPullPointSupport
RelayOutputs: 0
AudioOutputs: 0
Done
I've got audio (1 way, cam's mic to BI) from both my C-110's working; they're configured just like @bhedrington 's in post #42.I've got a C110 working well in BlueIris except for the audio. I had to change the port to 2020 for the ONVIF to work as well but my result shows [AudioOutputs: 0]:
Anyone got the audio working?
thanks, after checking all options i found this. If you mute the camera microphone in the Tapo app, it will mute it for the RTSP stream.I've got audio (1 way, cam's mic to BI) from both my C-110's working; they're configured just like @bhedrington 's in post #42.
Yes, also the privacy will also stop the complete stream as well.thanks, after checking all options i found this. If you mute the camera microphone in the Tapo app, it will mute it for the RTSP stream.