Mini-Review - EmpireTech LPR413-Z3
- Thread starter wittaj
- Start date
At night, not a chance.
During the day you may be able to make out most of them with some digital zoom at 120 feet.
Timokreon
Getting comfortable
Thanks much. Would that other camera you reviewed, can't think of the name, reach out to 120 feet? Think it the 3rd version of the camera. I know it doesn't do ANPR capture, but if it would capture the 3m plates better, it would be a win.
Yeah the Z12E with the new chipset will reach that far even easier than the previous Z12E
Mini-Review - 5241-Z12E-S2 - Replacement for the 5241-Z12E
Because we have had so many incidents over the years, I had finally convinced the neighbor at the beginning of the subdivision to allow me to put my LPR camera on their house so we could get everything coming in and out as they have a better angle and shorter distance than I do. I think many of...
Timokreon
Getting comfortable
Does anyone still have this camera in use? I'd really like to see what night captures look like at say 70', 80', 90'.
Doing new measurements and thinking, I MIGHT be able to set this up around 75-80 feet.
Doing new measurements and thinking, I MIGHT be able to set this up around 75-80 feet.
RJM_50
Getting the hang of it
This LPR413-Z3 looks like a more specialized version of the B54IR-Z4E-S3. Both with 1/1.8 4MP image sensors and a 8-32mm optical zoom lens. What changes required a different housing?
This camera actually reads the plates and logs them, so the processor is bigger to perform that and it has internal storage to store the plates.
It also has more capabilities like being able to open gates and what not.
It also has a speaker.
It has 4 larger lights that can do infrared or white light.
All of that means it needs to be larger to contain all the extra stuff.
It also has more capabilities like being able to open gates and what not.
It also has a speaker.
It has 4 larger lights that can do infrared or white light.
All of that means it needs to be larger to contain all the extra stuff.
RJM_50
Getting the hang of it
That makes more sense, it has the processing ability and storage built into the unit, and does not require an special NVR or system running on the network just for LPR data logging. Not sure if I skimmed over that part or if it's not a prominent detail in your review. That is really cool it doesn't require a special NVR or a machine with LPR software on the network.
We throw LPR around quite a bit and that is for the cameras like the ZE and Z12E that we have to manually read the plates or use a 3rd party platform to do the reading, whereas an ALPR or ANPR camera like this one has the built-in capabilities to read, store, and log the plates. These cameras will be larger due to the extra capabilities.
prsmith777
Getting comfortable
wish you could review this one. I have my eye on this
prsmith777
Getting comfortable
If you get one let us know what you thinkI have found out that there is a LPR ITC431 with 10-50mm lens. Of course the cost is quite a bit more, but I may snag one down the line just to see.
ARAMP1
Pulling my weight
The data sheet says it only goes to 40mm on the lens and it's an 850nm LED not 730.I have found out that there is a LPR ITC431 with 10-50mm lens. Of course the cost is quite a bit more, but I may snag one down the line just to see.
Timokreon
Getting comfortable
The one I'm looking at states 10-50mm lens. Are you looking at the international or USA web site?Here are 3 captures from the camera. The first two are in total darkness at 2am with zero ambient light. I do have 2 external IRs though. And have the camera IR off . Understand that these are snaps that the camera sends to a conputer on my network in addition to the live video i can review from my NVR. The picture file name contains tbe license plate number that the camera has determined it to be. I can search for any plate in that folder, even Search for a plate starting with the first two or three numbers or letters. It's so much better than my regular camera that I set up to capture plates manually.
Last edited:
Thanks. Testing IPC-B74IR-Z4-AI right now, ANPR captures are good and License plate # is embedded in OSD but can not put it in the file name. Was trying to make a central database that collects data from 2 cameras
I was just looking at it, because I don't recall being able to select the (parameters) to use in the file name. I don't think you can. You select the main folder where you want the snaps, and within that main folder will be a subfolder by date (2024-07-11). Within that dated subfolder will be an hourly folder (00 is 12am). Within that folder will be a folder with the minute of the snap. (21 ) etc. a snap in those folders above would have beenntaken at 12:21 am on 7/11/24 if that makes sense.
so now the actual file name of the above photo in the 21 folder is named ANPR 32-744- (haven't been able to decode that part of the file name) BG55972 where bg55972 is the plate. Assuming of course it was read correctly! Hope that helps.
Yea my ITC237 has these options to pick from (not web5 interface)
Was hoping lpr413 has similar setup. Or at least License plate is in the file name.
Can not use ITC237 because of the size constraints. So got IPC-B74IR-Z4-AI from Andy. But it looks like the file name tags are limited and do not include License plate
Was hoping lpr413 has similar setup. Or at least License plate is in the file name.
Can not use ITC237 because of the size constraints. So got IPC-B74IR-Z4-AI from Andy. But it looks like the file name tags are limited and do not include License plate