Color 4K-T -- Day / Night... im missing something

[flynreelow]

Finally for around to setting up my Color 4K-T camera and i cant get it to switch day and night profiles. I clicked on DAY, then set all my image settings etc, then went to time, and colored in the day portion roughing 7am to 7pm.

I did the same for the night profile, and colored in everything else purple for night,.
I make sure to hit apply (twice)

When i exit out of the browser, my image defualts back to DAY in my NVR program *even though its night time *Im in the purple.


Am I doing something wrong? How do I get it to adjust day and night profiles do to the time i set for day and night/.

I am using Customized Scene, instead of Self-Adaptive? Could that be it? I dont even know the diff between them both.

One more thing to note, in the camera, i set it for a 12 hour time format, but in the Time Plan Settings it looks like its 24. Does that matter?

Here are my settings below.
Please help.
Thanks

 

[Timokreon]

Set it to 24 hr in the camera and see what happens.

 

[flynreelow]

Set it to 24 hr in the camera and see what happens.

looks like that was it.

wow.
thanks.

is there a work around to get this working in a 12 hour?

 

[Timokreon]

looks like that was it.

wow.
thanks.

is there a work around to get this working in a 12 hour?

Not that I've found. Seems like quite a few of these cameras need to be set 24 hr time for some reason.

 

[tmxv4128]

looks like that was it.

wow.
thanks.

is there a work around to get this working in a 12 hour?

That's interesting because I have mine set for 12 hours (although I am customizing it for sunrise/sunset each month), and it seems to be working fine.

 

[flynreelow]

That's interesting because I have mine set for 12 hours (although I am customizing it for sunrise/sunset each month), and it seems to be working fine.
View attachment 216595

Very strange.

I'll try and switch back to 12hrs tomorrow and test again.

Are you using customized stream or adaptive?


Any others users running into this same issue?

 

[bigredfish]

Having learned the hard way after 12 years of Dahua camera, I always use the 24 hour clock.

BTW using Customized Scene is the correct way to force it to use your customized schedule. Same I do on 90% of my cameras

 

[biggen]

I’m also using a 12 hour clock on my 4K-X but I send a signal to the cam at sunset to have it switch over to night mode so I guess I’m not really using its built in scheduling since im commanding it externally.

 

[bigredfish]

Yup

 

[flynreelow]

I’m also using a 12 hour clock on my 4K-X but I send a signal to the cam at sunset to have it switch over to night mode so I guess I’m not really using its built in scheduling since im commanding it externally.

is this easily done, or through an integration program like HA or another.. ?