Recent content by bugmenot01

This device can be flashed with OpenIPC quite easily. In my case it had the 3518Ev100 chip, instructions are available here: List of HiSilicon SoCs - OpenIPC By doing this you have a much more modern CPU and a useable webinterface. I only found it a bit slow and wasn't able to configure image...

That is it!!!! Thank you sooooo much! That was amazing. I am now able to get in from the web as well as right on the NVR console.

Thanks, good to know. Attaching the Device table export.

The NVR is a TruVision 10s. I believe it is a rebranded Hikvision of some sorts. It was made by Interlogix which is out of business from what I can tell. Of the 8 cameras on the system, only 3 have the admin password of 1234. The other 5 are unknown. I thought I'd try the 'trojan horse'...

I am using Version 7.1 of the TruVision Navigator Software. This is the export of the User table [User.csv]...

The firmware on the camera is V3.0 FP10. I just managed to get the camera back working. It is a Interlogix TVW-5305. I took it off the wall when it stopped responding. The reason I could get into the camera was because the default admin password was left on this one. (1234) So I did a...

Sorry, I didn't realize that 1234 was the extracted password. I have tried that password on the NVR but it doesn't work. Also tried 12345. I have logged into one of the cameras with 1234 password and tried a reset on it, hoping that it would convince the NVR to give up the password. But...

Thanks for the link. I'll give it a try. Colin

My name is Colin. I hope there is someone that is still able to help me as this tread is a bit dated. I moved into a Condo that had 8 cameras installed quite a while ago. The system seems to be still working but unfortunate the admin password died with the former president of the condo. The...

Update: RJ45 Connector Looks Fine, I can access the camera using external power supply.

Nope, not touched anything. Suddenly this issue started.

Yes, I am having low IR light , blinking , any solution? No Link/Ping.

Hi, One of my IPC-HDW5231R-ZE cameras went into a boot loop and I have been unsuccessful trying to recover it. I can connect to it via UART-cable and I can see that the bootloader is working fine, but it won't load Linux kernel. I only see uboot startup message, no messages after that even...

I started having the same issue a couple weeks ago, I think it was after both a BI and Windows 10 update. I have an I7-7700, no discrete GPU and 16GB RAM. When it's green I can usually click on graphic (multi-camera view) and then click again (to maximize) and the green goes away. This is in...

i found out if i change this to javascript and the quality to 2160p it is working also: