Search results

This device can be flashed with OpenIPC quite easily. In my case it had the 3518Ev100 chip, instructions are available here: List of HiSilicon SoCs - OpenIPC By doing this you have a much more modern CPU and a useable webinterface. I only found it a bit slow and wasn't able to configure image...

That is it!!!! Thank you sooooo much! That was amazing. I am now able to get in from the web as well as right on the NVR console.

Thanks, good to know. Attaching the Device table export.

The NVR is a TruVision 10s. I believe it is a rebranded Hikvision of some sorts. It was made by Interlogix which is out of business from what I can tell. Of the 8 cameras on the system, only 3 have the admin password of 1234. The other 5 are unknown. I thought I'd try the 'trojan horse'...

I am using Version 7.1 of the TruVision Navigator Software. This is the export of the User table [User.csv]...

The firmware on the camera is V3.0 FP10. I just managed to get the camera back working. It is a Interlogix TVW-5305. I took it off the wall when it stopped responding. The reason I could get into the camera was because the default admin password was left on this one. (1234) So I did a...

Sorry, I didn't realize that 1234 was the extracted password. I have tried that password on the NVR but it doesn't work. Also tried 12345. I have logged into one of the cameras with 1234 password and tried a reset on it, hoping that it would convince the NVR to give up the password. But...

Thanks for the link. I'll give it a try. Colin

My name is Colin. I hope there is someone that is still able to help me as this tread is a bit dated. I moved into a Condo that had 8 cameras installed quite a while ago. The system seems to be still working but unfortunate the admin password died with the former president of the condo. The...

Update: RJ45 Connector Looks Fine, I can access the camera using external power supply.

Nope, not touched anything. Suddenly this issue started.

Yes, I am having low IR light , blinking , any solution? No Link/Ping.

Hi, One of my IPC-HDW5231R-ZE cameras went into a boot loop and I have been unsuccessful trying to recover it. I can connect to it via UART-cable and I can see that the bootloader is working fine, but it won't load Linux kernel. I only see uboot startup message, no messages after that even...

I started having the same issue a couple weeks ago, I think it was after both a BI and Windows 10 update. I have an I7-7700, no discrete GPU and 16GB RAM. When it's green I can usually click on graphic (multi-camera view) and then click again (to maximize) and the green goes away. This is in...

i found out if i change this to javascript and the quality to 2160p it is working also:

I have the same Problem. If i change the Quality to JPEG High it works again, i do not get a green screen:

Thanks for your reply, that's too bad - given the tool was outputting what looked like a clean output with no error code I had assumed it was something I was doing wrong. I now see hikpack supports r0, r1, r6, g0, k41, and k51 It looks as though I need one of E{0-7}, G{3, 5}, H{1,5,8}, or R2...

Hey, I've just started looking at hikvision as a potential research target. I'm a fairly experienced binary reverse engineer, but I hadn't expected hv's firmware format to be such a convoluted cluster. I'm particularly interested in patch-diffing for CVE-2021-36260 (for which there is a public...

On my Dahua DHI-NVR2116HS-I there is no that option. I have the latest firmware 4.01. How to limit recording time?

Hi Andy, I bought 2 x IPC-HFW5241E-Z12E from you in 2019. What is the newest firmware available for upgrade? I saw the following firmware available from Dahua website. I am not sure if these are safe to upgrade and won't brick the camera? What does does CustomPro, MCF, E2 mean? I am...

I managed to get this resolved. I think some issue with CoolTerm. Used macos default screen app and it worked. Now 3 out of the 4 cameras are not connecting. I am guessing the camera's got the password screwed when I did the "borked" firmware update?

Hi Guys So I have a DS-7604NI-E1/4P - it was running v3.3.4 Build 160614. I stupidly upgraded the firmware from here: https://us.hikvision.com/en/products/more-products/discontinued-products/digital-video-recorder/embedded-plug-play-nvr-ds-7604ni It let me set login pattern and password etc -...

they are not M4 screws, most likely M1.6 or M2.5, I made the same request and it got rejected. I requested the RMA through the shop I bought.

Ok some updates I plugged it out, took out the adapter as well and brought to my office for further inspection. It behaved the same exact way. Then I turned the power off then on but this time holding the reset button and it finally responded. RMA request already made but cant be sure, I'm about...

Last night my DB1C Died, I checked the charger 20V AC no issues. first the video signal became very noisy, then it all became gray and after a power cycle it died. Now there is a red LED blinking and I cannot reset

Read earlier posts. You need to first downgrade the Amcrest firmware and then you'll be able to upgrade to the Dahua version. I've done it an I'm on version DH_IPC-HX25(8)XX-Molec_MultiLang_NP_V2.800.0000000.19.R.200628 .

i wont really need higher optical zoom but the image sensor might be newer on S5? I really have no idea. Its for the same price so i thought someone might know this models. thanx

Hey there, I have been offered one of this 2 cams DS-2DE7432IW-AE(S5) and DS-2DE7430IW-AE. Is the 7432 newer version of 7430? I see 7432 has higher optical zoom but it has smaller image sensor compared to 7430, also i dont know what the S5 stands for. Anybody got idea? thanx

I just wanted to share my experience with Dynamic DNS on the Annke DT81DP DVR and to see if anyone saw something familiar. DVR SPECS: The Annke DT81DP hybrid DVR is a rebranded Dahua DVR, although I haven't been able to work out the model number. Major specs include 4K@30FPS UltraHD HDMI (TV)...

I also have the C6F0SoZ3N0PcL2 model, but mine came with the V19.1.14.16.28-20200416 version that has human detection / PTZ tracking / auto-zoom. I have no way to dump my firmware to a file, but this suggests to me that you might be able to upgrade to a v19.1.14.65 version... if you can find it...