Recent content by CustomIPCam

  1. C

    NVR Hanging during boot up

    Thanks to everyone for all the support to date. I am leaving for China tomorrow so will be offline for some time. I have switched on motion detection for all the cameras so now I have a red record icon and a yellow bell icon on each display. I also took your advice and connected up the 4th...
  2. C

    NVR Hanging during boot up

    Hi Corey First of all it looks like my ip address changes every day so this method won't work if I go on holiday and the IP address changes... any ideas on how to solve this? Also, tried this on my mobile and i can login to the NVR but i cannot see anything as it says "No plugin detected"...
  3. C

    NVR Hanging during boot up

    My router is from TalkTalk in the UK. My laptop and mobile phone are connected to the router, as is the NVR. The iVMS-4500 app can see the cameras because I only had to scan a QR code from the NVR for it to connect. This is the same from the PC. BUT, I have not managed to view the cameras from...
  4. C

    NVR Hanging during boot up

    My router is a Huawei HG533. I have set the following up on the router... Mapping Name Interface Protocol Remote Host External Start Port External end Port Internal Port Internal Host Enable Remove HIKVisionControl8000 nas_0_38 TCP/UDP 8001 8001 8000 192.168.1.33 Enable...
  5. C

    NVR Hanging during boot up

    Hi Guys.... I have watched a few videos but cannot work the port forwarding thing out fully.... My router has the following fields to fill in (assume I am doing this for port 80 (web)) - can you tell me if my assumptions are correct and also what is the internal port: Interface...
  6. C

    NVR Hanging during boot up

    Wow.... you are walking encyclopaedia !!! I managed to follow to step 2 but the port forwarding in step 3 is new to me so I was lost on how to do that.... I will google it tomorrow ... I'm tired from climbing up and down the ladder today ! Where do I check the NVR firmware version? Thanks
  7. C

    NVR Hanging during boot up

    Package arrived late on Friday so I unpacked the NVR and plugged in the Ethernet cables from the old POE IP Cameras but nothing showed up on screen. This morning I removed the old cameras and replaced them with the HIKVision DS-2CD2T42WD-I5 Cameras.... wow !!!! what a difference !!! The view is...
  8. C

    NVR Hanging during boot up

    Ordered today and due to be delivered tomorrow.... Will let you know how it goes... Thanks for all the support with the WAPA PDVR issue .... close but no cigar !!!
  9. C

    NVR Hanging during boot up

    The cameras seem to be UK stock: http://www.ebay.co.uk/itm/111923802606?euid=a3ea347a5b2748c994c18ccb06183067&cp=1&exe=12792&ext=32582&sojTags=exe=exe,ext=ext and so does the NVR...
  10. C

    NVR Hanging during boot up

    Thanks... that was very useful... OK, it's decided... I am probably going for: 4MP, 4mm lens, IP66, DC12V & PoE, WDR, 50m EXIR DS-2CD2T42WD-I5(4mm) £105.00 DS-7604NI-E1/4P £115.00 Total £535 Does anyone have any comments on the prices or the spec? It is an eBay seller...
  11. C

    NVR Hanging during boot up

    I'll have a chat with the POE Splitter shop tomorrow and maybe I can 'borrow' a switch to test the system with...
  12. C

    NVR Hanging during boot up

    I am not sure either but they are about 4 or 5 years old now and I am not sure what standard they are. With regard to the POE Injector, I bought the following one and used a 12V adapter to connect to it...
  13. C

    NVR Hanging during boot up

    I got a POE injector and plugged it into the adapter and into the first POE port on the PDVR and nothing... the LEDs on the port do not come on. I then plugged it into the router (say LAN4 on the router) and when I logged into the router, LAN4 was listed as disconnected. I even tried plugging it...
  14. C

    NVR Hanging during boot up

    Just googled POE Injector... I'll try to get one today especially since its a few quid !
  15. C

    NVR Hanging during boot up

    Is this POE going to be OK? http://www.cclonline.com/product/54620/TL-SF1008P/Switches-Hubs/TP-Link-TL-SF1008P-8-Port-10/100M-Desktop-PoE-Switch/NET0107/
See more
Top Bottom