Recent content by EganMontana

fenderman, I made the adjustments you suggested in items 2) and 3) above and it did not affect the problem. However, when I started looking at the "keyframes" subject in item 4) it opened up a large area of subject matter that I am not familiar with. In searching the BI Help files for...

OK, thanks fenderman, I will work on that. Duane

Ok fenderman, here are some images of my camera locations and Blue Iris settings along with examples of triggering/no triggering: The upper right (corner cam) and lower left (shop cam) are wireless cams connected to the BI PC in the house. The upper left (Garage cam) and the lower right...

Thanks fenderman I will work on that tomorrow. Also, l am not using any profiles. Duane

Thanks fenderman

Just to clarify my problem. I have three cameras on the outside of my house, all connected with ethernet cables to my pc and Blue Iris. I also have a shop building about 120 feet away from the house which has two cameras and these are connected back to the house using a wifi link, a pair of...

Thanks for the reply looney2ns I make a mistake in an earlier response. The Speco cam is on a wifi network but the Nelly cam is on the ethernet network. Both of these cameras exhibit the same problem. This is why I believe the problem is associated with the Blue Iris Motion Detection side and...

Thanks for the reply looney2ns Camera 1 is a Speco O4VT1M 4Mp, FPS is 15, iFrame is ?, cannot find it on the Speco camera configuration settings Camera 2 is a Nelly's NSC-2X4G-DM 4MP, FPS is 15, iFrame is 15 I usually keep my camera FPS and iFrame set to 15 Cars are entering and exiting a...

I have a four outdoor camera network at my home. The cameras are connected to my Windows 10 PC with a router and ethernet cables plus wireless network. I am using Blue Iris V 4.8.4.3 to manage the videos. Two of the cameras are viewing the roadways at the entrance to my home and at a corner of...

I've been using this webcam configuration below for several years now. There are four camera shown at the bottom of this diagram. It took me some time to get the "Shop cam" working reliably but this network is basically "ok" at this point. I am somewhere between a beginner and intermediate as...

Thanks Boristheblade, I found it this morning and have it downloaded and working. Thanks to the others for their interest and replies. Duane

Thanks fenderman, glad I'm not out to lunch on this. Now I'll have to figure what to do next. Duane

I cannot find the Blue Iris android app on the Google Play Store. I have the version from several years ago on my old android phone, but am trying to install the same app on a new phone, a Pixel 4a with android Ver 11 system software. When I go to the store and search for "Blue Iris" it does not...

Thanks for the reply SoutheryYankee, for what it's worth I've attached my network diagram. The connection I am troubleshooting is between the Netgear EX6200V2 and the Hawking HPOW5. I get it working sometimes with a good signal but later it justs drops out. So, I know my network IP addressing...

Thanks for the reply Mike A. There is a lot I don't know about TCP/IP so am just trying to solve a signal path problem. I will keep working on it. Duane