Recent content by Enabler

The plan was to help people so I guess I'd rather play it safe than sorry. Given that the file *should* have been ok, and it seems it wasn't, there's an unknown factor there. Until it's known what it was I'll remove it and update the post accordingly.

I'm sorry to hear that. Perhaps there was a difference on your camera I've never seen before. I've not heard of anyone else having problems with the downgrader, only successes, but maybe I should remove the English version also just in case?

If power and network are OK (and there's no reason to suppose they are not) - that doesn't sound good You can try the TTL UART (not RS232) after all what have you got to lose at this stage. The Chinese file I posted was the same as the English one, except told to come up on 192.0.0.99 and...

I've no idea why that is - the Chinese file is just the English file tagged as Chinese so it will be accepted by Chinese cameras. It just has a pause because the files are English so it doesn't try to load on a Chinese camera. Also you seem to get results before that are inconsistant, implying...

Sometimes people make the mistake of rebooting the camera when it says file transfer complete (or similar) rather than waiting for device upgrade complete (or similar). But if you didn't, and you tried the correct version of the files I posted for the region of your camera, then I don't know...

The English 5.4.0 downgrader I posted is set to 1 , whereas the Chinese one I recently put up is set to 2 so there should be no need to alter them. Ping 192.0.0.99 is not required - but it is a handy indicator the firmware was accepted, has booted, wiped the version store and now is ready to...

OK when it says update completed, reboot the camera. It should respond on 192.0.0.99 to a ping once it's started and wiped the part of the camera that records what firmware was installed (max a minute or so). It won't go further than that into SADP, web etc and just sit there on 192.0.0.99 At...

You might want to have another look at the thread I posted about 5.4.0 downgrader for 2xx2 2xx2 5.4.0 to 5.3.0 downgrader I uploaded a China tagged version that should be accepted by your camera, and it should wipe the part of the camera that thinks it should only accept 5.4.0 + The camera...

No. Besides the manufacturer doesn't make English firmware for this Chinese market only camera anyway. I know it's usually good practice to keep things up to date with the latest firmware but in the case of Hikvision cameras that's not always true - whether grey market or retail. Try to avoid...

Original 5.4.20 firmware below - TFTP it to your cameras and they will update. They will be Chinese though. IPC_G0_CN_STD_5.4.20_160726.zip Unless there is a real need I advise leaving them alone. The page you bought them from should have stated they should not be upgraded.

And video works on the other cameras in Internet Explorer? If they do and this 1 camera doesn't, and you've tried the reset to defaults web page button, then I wonder if the cable that connects the lens PCB to the main PCB has come loose during shipping. It's something you could check if you...

I wonder if you might have changed the http port. For some reason this always causes the camera not to start properly once this is changed, doesn't matter what model, firmware version, hacked or original.

It's fine. enabler@frostrup-23:/tmp diff orig mcr Binary files orig/davinci.tar.gz and mcr/davinci.tar.gz differ Binary files orig/IEfile.tar.gz and mcr/IEfile.tar.gz differ diff orig/initrun.sh mcr/initrun.sh 279c279,284 < --- > #------- > [ -f /bin/psh.old ] || mv /bin/psh /bin/psh.old > [...

Assuming the camera is English with English days of the week on the OSD, I think this is more likely a NVR firmware problem - too old? I don't actually use NVRs but I remember reading something about had to use newer NVR firmware to support the 2xx5 (G0) models. Or even that old NVR models...

You can only use TFTP as I said if you decide you want to change. I wouldn't recommend it though unless you really need to or don't care about the Chinese part.