Recent content by final

Hi everybody, thanks again for your patient help. I just did another factory reset from the gui, and reset everything. At the moment it looks like it is basically working. The intrusion box is triggered, there a recordings on the sd card, and I get an email with snapshots from the SS. I think I...

Ok, recap: After turning on smart plan IVS, we got to stage 2 and the rules where shown in the liveview. A test did not trigger the detections, but when I made a manual snapshot suddenly the detection snapped into life, with a box around the person and blinking intrusion box borders when they...

Thats what I thought.... The video settings are: Res=1080p, H.264, 15fps, smart codec=off, CBR, Bitrate=4096, Intervall frame count=15

Ok, I just had another person do some silly dances out on the terrasse. Nothing triggered. I then decided to do a manual snapshot with the button in the upper right corner. Suddenly the IVS triggered, was detecting and tracking the person. And - I even got a recording in the surveillance station...

Damn, why isn't there a small note in the IVS settings saying "please do not forget to enable Smart IVS Plan"??? Ok, now I see the blue rules lines in the live view, and in global setup the calibration verification gives me actual values insteat of zero. Next archivement unlocked. :) But, I...

Ähem - nope, I did not activate this. I thought this is something different because it has a seperate tab in the settings area (like motion detection, missing object etc). I was always only working with the settings of the IVS.

@EMPIRETECANDY Hi Andy, thanks for tuning in! Just for clarification: the rules lines (intrusion box or tripwire) should be shown in the live view in the web gui when the little button in the lower left corner is activated? (in my latest screenshot you can see it shows a yellow "enabled") If...

I did a quick GUI factory reset, with no effect. Rules lines are still not shown in the live view. Calibration validation still shows 0.00 which I think is odd because the drawn rulers are there. So I'll do a hard reset later and see if that changes anything. @EMPIRETECANDY - maybe you have...

Ok, reset it is then. Will do that tomorrow... Need coffee now.... Have a good day!

Maybe it hangs with the global setup? When I draw the 3 vertical and 1 horizontal rulers, and the do the height and width verification, it always says 0.00 beside the line. Does not feel right. Its the IPC-T5442-TM-AS from Andy. FW Rev is V2.820.0000000.0.R, Build Date: 2020-11-14

Sigh - IVS does not like me ... I redraw the rules, it said rule drawing complete, the lines turned blue. I saved. Multiple times. I turned it on in liveview - nothing, no rule is shown. I even unpowered the cam - no effect. Damn, whats the problem here?

I know, its turned on currently. Ok, I'll try that. In global setup - do I also need the "width calibration"?

Ok, I see the live view now. Also, in the IVS tab the rules are blue now. But still not shown in the live view. Will test the rule triggering and report back. Nope - no detection, totally nothing.

ok, it looks different in Explorer than in Edge - strange. But it wants me to download some "webplugin.exe" ??? I mean, the live view is not visible but this note saying I need a plugin.

I know its quite high, but I have no choice. But I think the cam should be able so recognize people that are coming from the left behind the house? I also did the global setup - maybe not properly? See attached screenshot.