Recent content by FLGator

I'm not sure what forum this should be in so I picked this as the best choice I could find. I am wondering why my Dauha 5442s and my NVR NVR5216-16p-EI take up to 15 mins to send a notification of movement to my DMSS app on my phone when I am at home and on the same network. If anyone has any...

It does seem the Auto Focus was lost. I went into the camera frome the NVR IE and in Conditions\Zoom and Focus I clicked on the Auto Focus button and it all came into focus. Thanks @smiticans

Yes, I have a pc but I view on my phone thru DMSS

They are the 5442ZTE

DMSS is the app and I don't remember the settings but they were from a post here from either bigredfish or wittja and their post spelling out step by step each setting in the camera. All I did was disconnect the camera from the NVR, unplugged the NVR and moved it upstairs and then connected...

I have had my 4 cameras configured and plugged into the NVR for over a month now. 5442s and one 180. I finally got around to running the wires, well one as the heat in the attic kicked my tail, I connected one of the 5442s and oh my gosh is it blurry. What could be the cause of that as it...

Ok, after much paralysis by analysis I have decided on this. Thanks everyone for your help. DG Cat6 Riser (CMR), 1000FT, Unshielded, 23AWG, Solid Bare Copper, Up to 10Gb Speeds, No Spline, Faster-Easier Terminations, 550MHz, ETL Listed, Bulk Ethernet Cable, Blue https://a.co/d/8Marjw8

So in reality, any solid core, non CCA, Cat5, Cat6 shielded or not, 350 or 550 Mhz will do just fine for transmission of video, audio, and PoE?

Anyone see a reason to not to use this? https://www.amazon.com/Voltive-Cat5e-Riser-1000ft-Black/dp/B098RGV4KD/ref=mp_s_a_1_1_sspa?keywords=Voltive+cat+5+riser+ethernet&qid=1696765616&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&psc=1

Never knew that was in the spec sheet. Thank you

What junction box do I need for the Dahua 5442 ZTE dome and the Dahua new 180 dome cameras? TIA

Thank you

I have the Dahuas from Andy.

Thank you! Also, do you have any recomendations on doorbell cameras? Nest is what I have and just up'd the cost from $50 to $80 a year. I want to add the doorbell to my NVR

Hello, I have a POE switch and the NVR has POE ports. I want to know if I have 5 cameras connected to the POE switch upstairs (while the NVR is downstairs) will 1 CAT5 cable from the POE switch to the NVR be able to carry all the data from the 5 cameras without issue? Long story but NVR needs...