I tried the ful list and have had no luck.
Ispy can't find any URLs on port 554 or 80, I know my device can be connected to on the mobile port which is 9000 through tinycam monitor and chat word just fine.
I did notice if I tried a URL as follows I did get a mini httpd page not found error...
Thanks for that.
I've copies all the lines related to zmodo cameras that have the word channel in them and de-duped it and came back with the following possible url string.
FFMPEG
rtsp:/
/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp
VLC
rtsp:/
[CHANNEL]
VLC
rtsp:/...
Yep already looked there.
They're for camera's only from what I can tell.
I'm looking at how to do it for my zmodo DVR (DD-SBN-8) and then connect to a particular channel.
The cameras are connected to the DVR via coax so you can only cannot to the DVR directly.
Hi All,
I have a very old Zmodo DD-SBN8 DVR (8 channel via coax, unit has a network port)
I can view the cameras off an android app call tiny cam monitor. (Supplied ip address of dvr, camera channel and credentials along with mobile port)
What I'm trying to work out is if this app can build...
Thanks for the advice guys.
I think I'll spend that bit extra and go through a licensed supplier.
Bit of a price difference but might as well pay for it to ensure I'm getting something that's high quality and solid copper.
I don't think I'll use a 305m roll of cat6 but it will be handy to...
Hey guys,
Found 300m of cat6 for sale on ebay and thought I'd throw a question to the forum
305m Cat 6 Cat6 Blue Solid Network LAN Patch Cable Home House TV Box PS4 Xbox | eBay
Just wondering if this will be good enough to wire up my camera's around the house.
Cheers.
And after two hours of searching I finally found what I need.
Delock Cable Power Floppy 4-Pin Female to 2 x SATA 15 Pin Female Metal 20 cm | eBay
Surprising this wasn't in the box when I received the NVR, I've found only one seller on eBay that supplies these and it looks like they're in...
And here's a picture of the internal of the NVR:
As you can see we have two connectors from the power supply, one for the poe ports and one for the other board.
The white four pin connector on the far left is actual labelled sata power but no guide anywhere as to the type of power to sata...
Hi Guys,
I've just purchased a WD Purple 6TB hard drive and want to install it in a Dahua NVR.
Trying to work out what sort of power connector cable is in the photos below.
It's definately not a 4-pin molex, looks like a berg connector or something like that.
Any ideas? It needs to plug from...
Was just wondering if it's possible to have any zoom presets with this camera via a Dahua NVR?
I couldn't see anything possible but thought I'd ask here.
Reason I'm asking is to have some presets in TinyCam available but the camera isn't in the currently support list.
OK i finally worked it out.
The format is as follows:
rtsp:/user:password@hostIP:554/cam/realmonitor?channel=2&subtype=0
The problem was that my NVR assigned the cam on ethernet port one to channel2, but there is also another value for that camera called remote channel no. which was actually...
Hi,
I'm just trying to figure out how to do this.
I've worked out that using quickddns and p2p via the gDMSSLite app works fine and can view it remotely.
Via tinycam if you try to auto detect it pick up the the Dahua NVR as ONVIF and you can view it if you use the lan IP (Currently have one...
Thinking about this, in my situation I'd need to run the cat 6 through the second level roof space, then drop it between the brick wall and the plaster relative to the area i need the camera
Now if i wanted to pull the cable out at 6-8 ft from ground level I'd need to either
a) pull a brick out...
The gear arrived on Sunday lunchtime! Yes DHL delivers on Sunday's in Australia....
Ordered the NVR5208-8P-4KS2 and one IPC-HDW5231R from Andy.
Haven't bought a hard drive as yet but plugged up the camera and NVR on my desk at home and after a bit of fiddling and then using smart pss got the...