I've gone through the settings and have a pretty good feel for them (they are doing better than before). Once I go as far as I can, I will do a quick write-up on them with screen shots for anyone else in the future.
As far as firmware, I will only be upgrading FW provided by the manf. I have a...
I guess this will be the last update for a while. I have been adjusting some settings in the cameras directly and I have improved the issue, but it is still there. I thought I had 2 of 3 working reliably, but this AM I found another doing the same thing. So at this point, I feel sure that this...
Agreed. I need to figure out how to do that without having the IR LEDs on all the time. And along with that, what is causing it to go into daytime mode in the first place? This is what I will be working on. At this point, I do not think it is power related, but I will unplug 2 of the 4 items on...
OK, here is an update. I had one of the cameras exhibit the issue overnight. I have included two pictures, one working normally and the other with the issue. Something interesting to note is in the normal picture, you can see the IR lighting up the other end of the yard (right hand side, toward...
I can try that after changing the IRCUT value. I have checked the power on one of the three cameras and I got 2.3W idle daytime mode and 12.%W on power on and startup.
One more thing. I have not previously mentioned it (because it was not a problem), but I have a different model IP POE camera in the garage. It is connected to the POE switch (and it works fine). Here are the image setting on it for a reference if that helps. This is also the default setting.
I...
I have not changed any setting here, so these should be the default setting. Honestly, I am not sure what changing some of the settings would do. Any thoughts?
That was a good question. I got this switch through Amazon https://www.amazon.com/BV-Tech-Switch-Ethernet-Uplink-Function/dp/B075G2PM17/ref=sr_1_4?crid=381TU9G2M3VEF&keywords=6-port%2Bpoe%2Bswitch&qid=1681819792&sprefix=6-port%2Bpoe%2Bswitch%2Caps%2C136&sr=8-4&th=1 I have used 2 of these...
JideTech [Update] 5MP Outdoor PTZ POE Camera
JideTech 5MP POE Camera Humanoid Detection PTZ Camera (P1 Plus-5X-5MP
Blue Iris V 5.7.4.2
Device information from camera setup info
DeviceIP – IPCAM
Device Type - C6F0SoZ3N0PgL2
Software Version - V24.1.11.15.3-20220113
Web Version - V3.0.7.1...
Just a short note. I just picked up a new HikVision 4ch DVR (no HD) off eBay for $30 with free shipping. This works with BI and the DVR supports RTSP. This means that you can use this DVR as a video encoder with inexpensive analog cameras and import them into BI. This is a very inexpensive way...