Recent content by manwald

  1. manwald

    Dahua IPC-C26EP / Imou LOOC usable without app?

    Hey guys, I'm thinking about buying the above cam, just as a "try-out". I own several Dahua-cams and also a 16-port Dahua-NVR. Will I be able to use this cam without the native Imou-app? I just want to integrate it in my Dahua-NVR-setup. Best regards Mischa
  2. manwald

    Firmware for newer dahua cams as well as detailed specs available here

    Thanks for clearing this up. I too didn't know that. Is there a list anywhere what name stands for what type of camera? I have this one (Prometheus) and some HDW5231Z/E. And what is the difference between ...PN... and ...NP...?
  3. manwald

    SD1A404XB-GNR on NVR5216-16P-4KS2E not powering up - PoE-cable too long?

    Hi guys, I recently switched from my IPC-HDBW4231E-ASE to a SD1A404XB-GNR in my garage, which is connected with a 25-30m Cat6-cable to port 5 (green one) of my NVR5216-16P-4KS2E. The old camera was running flawlessly with that connection, but with the new one I have a big issue. When I...
  4. manwald

    Firmware for newer dahua cams as well as detailed specs available here

    Hi, where did you find this firmware?
  5. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    I just want you tell you that I had success with the solution @pozzello mentioned :D I tried two different solutions, this and this Using the two cheap splitter-cables didn't help me, because my NVR didn't find the two cams. But I had instant success with the 4-port PoE-splitter (BTW, I paid...
  6. manwald

    Yi Home Camera RTSP Hack - Connect To Blue Iris

    Nice work, mate! Some features are only available for paying supporters?
  7. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    Okay, thanks for your tips! Could you just tell me which pins on my shown connectors are which? And can I also use PoE that was with only 4 wires? Will 100Mb be enough for a 2MP Dahua IPC-HDW5231R-Z? @reflection I crimped all of my cables with the shown connectors, that has a color sheme...
  8. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    How do I crimp them then? I have 8 different cables inside my ethernet-cable, 4 pairs (brown, orange, blue, green with each a corresponding white). Which cables should I connect to which part of my connector? I'm using these ones from METZ CONNECT (TIA-568A):
  9. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    Okay, I bought this one on Aliexpress, gonna see if it works. If not, I'll try your recommendation with the MMF/MFF-splitter. Thanks a lot for your help!
  10. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    Which one do you mean?
  11. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    What about the PoE-switch I linked above? Will it work too?
  12. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    Also ordered this 4-port-device from Aliexpress, gonna try it too.
  13. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    Just ordered the ones you linked (MMF + MFF version as the two cams are not right next to each other) from Aliexpress and gonna try it. Thanks!
  14. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    Interesting side-fact I just found out: it seems like this PoE-splitter is also sold under the Dahua-brand as PFT1300 - with the warning that it wouldn't work with the proprietary PoE-standard from Dahua NVRs: https://nexonik.com/IP-passive-PoE-Reichweitenverlaengerung-Splitter-PFT1300
  15. manwald

    Splitting one PoE-ethernet cable from my NVR5216-16P-4KS2E for two cameras?

    Thanks for all your precious tips! I now know that I could solve my problem on one or the other way :-) Unfortunately the parts seem not to be available in Germany too easy, so do you think that using this active (means powered) PoE-switch will work - even when it's connected directly to one...
See more
Top Bottom