Recent content by MFuller

The trouble with that is, I can't see when motion is detected when viewing playback. My unit is in my node 0 so I can't have direct access to it. I use the web interface. I need to be able to go over last nights footage and find all motion detection events whilst still having continuous...

Hi All, I'm hoping you can help. I really am struggling with motion detection on this camera. It makes no sense what so ever. If I use Normal motion detection mode. Everything sets it off continuously. Slight tree movement, shadows.. every tiny little movement. Sensitivity doesn't seem to...

Indeed they do. The issue is with the Intrusion Detection events not showing when the Swizzler is changed to intrusion detection with continuous recording selected in Storage.

I'm viewing on a computer.. The NVR is in a comms cupboard and there's no room for a monitor :(

I think using the storage mode as Event seems to be working now (I had to set the the threashold lower). Down side to this is, I prefer to record continuously and just see events highlighted :(

Funny enough, that's what I was thinking. So I've setup intrusion detection, but when viewing playback, I never get any intrusion detection marks. I had storage setting set to continuous, set the view to single camera and set the toggle icon to intrusion, and nothing appears in the lower line...

OK, all enabled but still nothing showing and loads of random motion. Rules are enabled. Motion is set to 20, with Dynamic Analysis. Still getting loads of detections, but no on-screen display showing why.

Do I need Dynamic Analysis for Motion to be turned on as well for rules to work?

Hi All, I have a Hikvision camera (DS-2CD2343G0-I) connected to my NVR (DS-7616NI-K2 / 16P, v3.4.101 build 180904). My issue is with the motion detection for this camera. I like to record continuously but see motion events in the timeline. See below: When I view these motion detections...

Ah yes, of course. Someone mentioned that before. Has to be Hikvision cameras. What a shame such a limitation exists :(

Sorry to revive an old thread, but this relates to a question I have. I have a DS-7616NI-K2 / 16P with the latest firmware: V3.4.101 build 180904 When using the web interface, I want to set the NVR to record continuously but also mark when motion detected. So, "Continuous & Motion". It...

Does motion detection ONLY work for Hikvision cameras? I have a generic IP camera, the motion detection seems to work on that if I set storage mode to motion (annoying as I was continuous with motion alerts). The Vivotek that does have a supported protocol in the NVR doesn't seem to record...

Thanks for the reply. I was hoping that I could set the cameras to record continuously, but show when motion was detected. That was if something happens that doesn't trigger the motion detection, I can still retrieve the video. But it looks like it has to be continuous OR motion detection...

Hi There, I recently purchased the above NVR. Currently have two cameras, neither are Hikvision but both support motion detection. I've tried setting up motion detection via the NVR, but nothing ever seems to happen. One camera for example is a Vivotek IP8160. It connects fine and is setup...