Recent content by mrigor

running temp cameras on a construction site. i got vivotek cameras but no recorder. What is the cheapest option? i have qnap but only 2 free camera license. Is there any other nas devices without camera limits?

I have looked at a ton of different models. Just hard to pick which one would do the best in very low light and be color and night. Plus a reasonable price. What would be your suggestion

I found these cameras at 175 Canadian per camera. How will these cameras perform with color night vision.

Looking for a good camera with color night option. Was looking at the lorex LNE8950A

i can connect with putty using ttl adapter. Booth using CTRL-U. i set the ip address of 192.0.0.64 and have tftp open with 192.0.0.128. Firewall turned off... No connects to tftp. i am lost. any suggestions?

i am looking for a damaged or broken nvr. (i have a good power supply, but bad board)

Still no luck, i have tried 3 different computers. Fresh install of XP SP3. Still nothing. I was thinking if anyone knows the root password for the lorex nvr's I can try to telnet into it and force the flash file. using regular cat5 cable connected into the LAN port on NVR. Windows detects the...

Did you anyone figure out the root password for lorex?

that will be super. can you make a dropbox link or upload somewhere? email will work too

it worked before using the 192.0.0.128. only a few questions as i do not remember. When you set your ipv4 to 192.0.0.128, and open TFTP will it right away show 192.0.0.128 or only after it starts booting? for me it shows 127.0.0.1 at first then if i close tftp and reopen with nvr powered up...

i am reflashing lorex to hikvision. i had 4 units sitting around. 2 i reflashed last year with no problems. Now last 2 will not take the flash or will not connect. yes they are working.

I have tried several different computers to work with TFTP. It seems it does not want to connect to reflash the nvr. it never finds the nvr. at first it shows 127.0.0.1 BUT if i close TFTP and reopen it when nvr is on it picks up the new ip address 192.0.0.128. Any suggestions?

I am looking for DS-76xxNI-SE(P) V2.3.11 firmware to upload to a lorex nvr. if anyone can PM me a link or post a link.

I have only 2 cameras connected. Is it possible to only output 2 cameras without displaying the other half of the screen black? I only have 2x2 output.

I am wondering if anyone had ever connected some sort of weather station or weather adapter to display current weather in a NVR channel. For example you have 3 cameras connected, and 4th channel is displaying outdoor weather.