DS-76xxNI-SE(P)_USA_Firmware_V2.3.11 Download??

[mrigor]

I am looking for DS-76xxNI-SE(P) V2.3.11 firmware to upload to a lorex nvr. if anyone can PM me a link or post a link.

 

[alastairstevenson]

Any of these close enough : DOWNLOAD PORTAL

 

[Penhead]

I've got the file, what's the allowed method of sharing on this forum?
2_3_11 150625

2_3_12 160622 which supports 4k and I think is the final build for these legacy boxes (DS-76XXNI-SE(P) USA) is also out and I have it if needed.

Correction - 4MP not 4k.

 

[mrigor]

that will be super. can you make a dropbox link or upload somewhere? email will work too

 

[gpower07]

I've got the file, what's the allowed method of sharing on this forum?
2_3_11 150625

2_3_12 160622 which supports 4k and I think is the final build for these legacy boxes (DS-76XXNI-SE(P) USA) is also out and I have it if needed.

will not support 4k. outdated model.

 

[Penhead]

will not support 4k. outdated model.

Correction, Hikvision claims .12 supports 4MP cams.

 

[NVRnovic]

Correction, Hikvision claims .12 supports 4MP cams.

I need a copy of the Hikvision 2_3_11 150625 firmware. I bought a new old stock hikvision ds-7608ni-se/8p on e-bay and need to upgrade the firmware, I can't find it anywhere and Hikvison no-longer supports this model. If anyone has the firmware, please e-mail it to me or post a link to it, so I can download it.

 

[Dwellonroof]

I have dug my DS-7608NI-SE/8P out of storage to give to a church since I use Blue Iris because of the sensitivity setting on the Hik unit didn't satisfy me. Anyway I have a US version but wanted to update the firmware to the most recent but it is no longer available on the Hik website.
Does anyone know what the version upgrades do? (I have V2.3.3,Build 130620)
Should I leave it be? Or would it benefit to contact Hik for Legacy upgrades?

 

[alastairstevenson]

Anyway I have a US version but wanted to update the firmware to the most recent but it is no longer available on the Hik website.

Not a lot of firmware around for that model.
I don't know how risky a major update to this release would be : DOWNLOAD EU PORTAL
Or even if it's a match for your model.

Or maybe these are worth a look as well : ftp://ftp.hikvision.ru/01.%20%D0%A0%D0%B5%D0%B3%D0%B8%D1%81%D1%82%D1%80%D0%B0%D1%82%D0%BE%D1%80%D1%8B/05.%20DS-76XXNI-SE/

 

[Dwellonroof]

I called Hik and they told me to email support, we'll see what they say.

 

[Penhead]

Here is 2.3.12 for USA (DS-76XXNI-SE(P) USA).

I also have 2.3.7 through 2.3.12 if you need them.

 

[Penhead]

Here are release notes that I have:

 

[Dwellonroof]

Here are release notes that I have:

Thank You, I will read through these

 

[Dwellonroof]

Well, got all updated and hooked up 2 Dahua cams and everything seems to be doing fine and Penheads link are the same as Hiks, now for my next project I want to install a SD49225T-HN to the Hik NVR but not sure how to power the camera since it takes more wattage. Can I purchase a poe splitter/injector and with the correct voltage and be fine without back feeding the NVR?