Recent content by NetEyeD

"I've the same camera recently installed more for looking at wildlife in our back garden. I'm currently on the latest firmware Stream3_812.0000007.0.R yet can switch back and forth to V2.800. 0000000.5.R." I could as well, but there was also a v2.810 and from 2.812 back to v2.810 failed, it has...

I noticed the same behaviour, briefly shown some IVS items and then they disapear, when they did apear I could set the options, but there's an audio linkage option available that is more for a TiOC camera then the SD50225. The old firmware shows PTZ presets and in SmartPSS I could still adjust...

- SOLVED - I couldn't give up, disapointed in the support from Dahua, I found an older firmware! V2.812 couldn't downgrade to version V2.810. But, found V2.800 on my Onedrive and was able to downgrade the firmware.I think I stay away from further firmware updates. The PTZ optioin is back and...

Even powering down completely didn't work. In the .bin file, there's a file that shows the camera types this firmware os for, it shows some options that only TiOC camera's have, I think the firmware is wrong. That is not the first time... I even have a reply from Dahua, they said to contact...

I've powered down the camera completely, removing the PoE cable and waited about a minute. It came back up later and all the rules still work, but again, no option for PTZ in the IVS rules. It's now connected again to the NVR. :confused: I have emailed Dahua Support. See if they have a clue.

That's something I didn't do, power down completely ! I'll try that first and set it up, not connected to the NVR.

I used 3 different laptops with Chrome and Edge and even from an android tablet, it all was visible, now it's gone. I can check if I can find a laptop with IE still on it. update: nope, IE doesn't see the option either.

I have a Dahua SD50225 (amongst others) and I noticed something very strange. In the camera I have set up many IVS rules, some for intrusion, some on tripwires. Intrusion is used with autotracking, but the tripwires make the camera look in another direction. In short, IVS rule 1, with a...

I have upgraded my NVR4216 4k2s with this new firmware and also updated my camera's with the latest firmware. 1 issue I noticed and have not been able to fix is the IVS. These IVS rules were there before I upgraded and they worked fine. Camera A had a tripwire event and then moved to ptz preset...

Hi Del Boy, were you able to check with your supplier? I have been able to open the device and remove the backup battery for a day, but still no success. All it shows is a screen with NETWORK VIDEO RECORDER, some 010001011010100011 and some blue blocks. but... the drive runs, the network lights...

:shame: It worked fine, but I heard there was new firmware supporting HTML5 so it would work on every browser. It was more or less an experiment and I'm not without recording, as I use Angelcam and BlueIris too, but somehow I just DO want to fix this device.

Unfortunately Hosafe doesn't respond to anything, not to email, not to skype, no Skype messaging. Nice :numbness:

At the end it turned out to be a very simple and much overlooked issue. Powersafe on the external disk.... it took too long for the disk to start up after a period of no activity, causing the issues. I have selected 1 camera that records non-stop so the drive stays active and all issues were gone.

I have firmware, but the device doesn't respond, so I can't use the webinterface to get the firmware in.

Thanks, I have send an email last week, no reply yet. i have just send a message using Skype too. See what they come back with. Would be great if there's a reset option, there's no button or any screws on the device...