Recent content by obqo

  1. O

    People Counting Camera and notifications?

    Hi, In general how do the people counting cameras work in terms of alerting? I know you can get reporting over time, but it can it do alert based on a threshold set? If occupancy gets to a certain number I would like to alert IVMS and trigger a contact or relay. Anyone have any experience...
  2. O

    Raspbery Pi2 Camera Monitor w/Rpisurv

    Did you try startx? You could also run raspi-config and change the boot options to desktop v CLI. Not sure why the rpisurv would change that.
  3. O

    What is the Device No. used for on the Basic Information tab?

    Probably a dumb question and it has no use at all....... but what is it used for?
  4. O

    Craziness ..... Convert IP camera to NTSC analog video?

    @concord Thanks for advice info! Since the Zero has a bit better processor it should get it done. I will order one up and report back.
  5. O

    Craziness ..... Convert IP camera to NTSC analog video?

    Thanks - I will report back. I may get a zero to try.
  6. O

    Craziness ..... Convert IP camera to NTSC analog video?

    I am going to give this a shot tomorrow on a RPi4. Have you tried it on a Zero W? I am probably only going to run 640 x 480 or maybe 720p
  7. O

    Craziness ..... Convert IP camera to NTSC analog video?

    Thanks for this - I would have to balun it back, but simple enough to pull another cat. Thanks for the info - certainly an option.
  8. O

    Craziness ..... Convert IP camera to NTSC analog video?

    I did not realize this.... Thanks very much I will check it out.
  9. O

    Craziness ..... Convert IP camera to NTSC analog video?

    Cool device indeed. In my case the modulator (Analog UHF) is already installed and working. The existing TVs are not DTVs in my case.... A QAM version of this for the US would be an option in other projects... I will hunt around. I may try a RPi RTSP > HDMI to composite video converter...
  10. O

    Craziness ..... Convert IP camera to NTSC analog video?

    Composite video > to RF analog ultimately.
  11. O

    Craziness ..... Convert IP camera to NTSC analog video?

    So.... I know this is a strange request. I have a client with an older analog system where 3 of the analog cameras are modulated on to an RF analog TV system..... aka DTV boxes creating their own channel lineup. Anyway - They want to replace the analog cameras and go IP with an NVR. Easy...
  12. O

    Hikvision NVR hard drives show as uninitialized after reboot?

    Well..... I decided to simply reformat the drives. They are now working normally. Wish I knew what cause them to error out after reboot. I have an alert setup to let me know what of any further disk errors. I should have set up the alert straight away. Live and learn.
  13. O

    Hikvision NVR hard drives show as uninitialized after reboot?

    Thank you for this - I am off site atm and will have to check #1 and #2 later. SMART test results (short test) Drive 1 & 2 information Temperature = 29 degrees c Power On = 335Day(s) Self-evaluation = Pass All-evaluation = Functional SMART Information / status = ok I am a little unclear how...
  14. O

    Hikvision NVR hard drives show as uninitialized after reboot?

    No luck after reboot - any ideas? I was hoping to bring them back online without loosing what recordings were there....
  15. O

    Hikvision NVR hard drives show as uninitialized after reboot?

    It looks like NVR was rebooted - then I see exception HDD Error 1 & 2 in the logs. So the reboot caused the HDD to error out? Before I do anything - I will reboot again and see if they come back.... worth a try.
Top