Recent content by oldman

Did you edit the EZVIZ config file from the installation to include the Show=1 ??

You need to click on the gear icon (All Devices) in the lower left corner not the "Menu" button. It should bring up a dialog box titled "Devices under the Account". On that screen press the "Avanced" button and it should bring up the "Remote Configuration" dialog.

Try using the EZVIZ Studio software (EZVIZ Support - Creating Easy Smart Homes) i mentioned in reply #310. It seems to have all of the settings available for the DC1C including wifi. The wifi settings allow you to pick/enter the SID using either a scan of seen networks or manually entering. I...

I have the db1c up and running great! Couple of things I found was to install the EZVIZ Studio software to do the other config stuff. Not sure on the Hik-confg software but the EZVIZ Studio software with a mod to the config file works really good and allows most, if not all config settings to...

According to Dahua's install manual (https://www.dahuasecurity.com/asset/upload/product/20180124/Dahua_PTZ_SD29_Series_PTZ_Camera_Installation_Manual_V1_0_11.pdf) it is located around the SD card slot. See install manual page 3 (or PDF page 9 for details)

Just a observation: I noticed that you say your router is a Asus TM-AC1900 Router, which I think is the AC1900 supplied by T-Mobile. Those routers have been modified from the original Merlin firmware, and may not fully support VPN. Re-installing the actual Merlin firmware might make a difference.

Another thing to check is your profiles. Do you have a profile that is changing at some period of the night that would be set to not trigger. You should probably post your profile settings. Do you have a daytime and night time profile maybe? Just need a lot more info on what all your...

Hmm, ok, need some additional info. What are your power settings for the BI PC. They should be never sleep or hibernate. I don't understand what you mean by "BlueIris is open on the server, triggers and alerts work well. Close BlueIris on the server, triggers and alerts stop. " If BI is...

Sounds like you don't have the 'Run as a Windows Service" checked. It's located on settings in the Startup tab. Just make sure it's checked. That way when you close the UI the server is still running.

Mine is working ok. I had put http:// in front of the command, duh. You might check your web server settings under advanced. See if you can use the limit IP addresses ^ character to select local addresses that don't require login. For example: entering ^192.168.1.* would exclude all ip...

Ok, tried your command in the "Post to a web address,,,) in the alert section for the camera and I am getting an error back. Looking the log it shows "Web: error: no stream" I use the alert section "Post..." for setting camera ptz and setting the profile for a particular camera and haven't...

Does it work when passed via a browser? I always test in a browser first to see if the http command is working.

I just used the chrome browser to test the http command. The data should be returned in the body section of the browser.

Tried your string on my system and worked fine. I noticed that you have a space in your command between the profile= 2, which might be causing problems depending on your browser. Try removing the space or add a %20 in the http command (see below)...

I use Domoticz, which is a free open source solution that supports many hardware platforms and protocols, Z-wave being my primary. You can communicate with Blue Iris via JSON, HTTP, IFTTT, and others. My Z-wave controller is the Aeotec USB Zwave controller (about $40+). Domoticz supports...