Hi there
I have a cam on a remote site, and the NVR here at home. I can add the remote cam to DMSS with it's SN, but I need to add it to my NVR in order to save the images on the HDD.
My question : is there any way to add a remote cam to the NVR using it's SN instead of IP address? As it is...
Hello
Does anyone know if it is possible to improve the appearance of the image of the cameras switched to corridor mode?
I have cameras filming store and warehouse shelves, I rotated the cameras 90° and set the "flip" setting to 90° too. The image is therefore straight on the mosaic but...
Hi there,
I am working on the refection of a city CCTV setup. There are ethernet cables already in place but the distances are quite high (up to 800m).
I wonder if the Dahua ePOE could be an option. I have selected 10.9W IP cams (IPC-HFW5442E-Z4E) and on the longest path I have 2 cams, one at...
Hi
Thanks! Indeed it works this way.
I solved my issue (I was using this syntax to get to my TiOC through my NVR but did not manage to get my light ON and OFF) by get the IPC out of the NVR private network. As I did not manage to do that by software configuration, I connected the cam to a POE...
Hi
Thank you for following up. The cam is an IPC-HDW3449H-AS-PV and the driver I use is : DH_IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.820.0000000.5.R.210705
No, when I type the command : http://<IP>/cgi-bin/configManager.cgi?action=getConfig&name=Lighting
I get :
table.Lighting[0].ErrorId=1
table.Lighting[1].ErrorId=1
table.Lighting[2].ErrorId=1
table.Lighting[3].ErrorId=1
And for ...
Hi Dave
Thanks for this, it helps.
By the way, do you the command to switch on or off the cam illuminator? (The led that allows the night color vision)
Hi
I understand that you manage to access your Dahua branded cams from outside your network by connecting to your NVR then to the cam page? This is what I've tried (I click on the Internet explorer icon on the cameras menu) but it opens a tab with the private IP address of the cam so I can't...
Hi there
I am looking for the API http command to activate or deactivate the TiOC cams illuminator.
My goal will be to switch it off and switch to b&w vision when we are at home, and switch the light on and switch to full color vision when we are away.
Thanks bye
:v:
Hi there
I have some POE cams linked to a POE NVR. My issue : I can't get to the cams configuration page if I am not also linked to the POE switch.
Is there any way to configure the cam or the NVR to solve this issue?
Thanks!
Quentin
Hi there
Thanks for the API lines to activate/deactivate the light.
Also for the siren and the leds. It works for me : when I make the request "cgi-bin/coaxialControlIO.cgi?action=control&channel=2&info[0].Type=2&info[0].IO=1" the siren actually rings out loud. But what I would like is not to...