Recent content by reverend

Just upgraded the PTZ1A225U-IRA-N to 2.812.x and looking good thanks Andy, got the 59225 sat on the bench so will do that later.

I've had it installed on mine for a few weeks now, I don't use AT on that camera but otherwise it's been fine, just had to update the BI PTZ profile to get movement back. I do reboot the PTZ cameras daily (an old habit) so haven't seen any long term things as mine are never up longer than 24...

These are my settings (I've got bitrate cranked up higher than it needs to be but I've been very happy with these settings). They would need tweaking for your environment and work well for mine with the LED light actively on and used with a street light a couple of houses away. I probably...

Sorry just got the 2335 hooked up again yesterday - it was 1/60.

When setting these to detect cars or humans can you prioritise one over the other, ie follow humans more importantly than cars?

I think they're limited by the older SoC in these in terms of what it can do with autotracking etc. I might try a temp cable run to a 4Mp cam to see how that compares in the dark, it's been a good week for firebursts during the lyrid showers! I'm not sure what this next one was though - it...

Is that +VAT mate or including please? Have to admit I'm tempted to swap out the 59225 and sell that on locally.

I was trying to capture Starlink and ended up catching a few shooting stars during the lyrid shower.

Sure - I don't have any recent ones of people at night but here's one of the local cats coming in to take yet another crap in our backyard (this is zoomed in a bit more than the last one was). This area is normally pitch black as no lighting at all.

I've been waiting for this one too - really happy with the same size sensor in the HK turret I put up recently. My 59225 is quite noisy (much more than the 1A225) so hoping these new ones will be quieter. Half of me is thinking the 4 series will probably do what I need but the quality of these...

I did try with the LED light off but for movement motion sharpness drops and noise ramps up at the 1/500 frame rate I'm using here - the light works well for us as although there are a few LED street lights on our street it's too dark to see where you're putting the key etc. Plus the added...

This is my 5231 in corridor mode in a narrow path - it's on the PFB203W Just drop the height and it works well. I'll only replace this with a camera with motion activated PIR I reckon so it doubles up as a light. For now I don't want to put a camera with always on light at night as the local...

You have to set one at first login - try logging into the default IP printed on the box and see if you can get in There's also the SADP tool that should tell you the ip, change your laptop temporarily to match and try to connect.

Hopefully this will help - if you pick the model and leave defaults apart from IP, username and password that should then work straight away. If you change the default ports you would need to update that too.

The biggest thing from the 2335 is the aspect ratio difference of the sensor & lens. On the 2335 I could easily fit the full length of the left hand estate car in but I can't dial this one in. With this new ColorVu camera the picture is sharper across the entire frame (my 2335 was soft towards...