Recent content by SandmanXX

I got it working through BI, although they are a little slow, and keeps sending me repeat pictures.

That did it. Thanks a bunch. Did not go the app password route, previously. It works now, at least the test does. Now I've gotten the motion settings set up and it'll be a waiting game. Thanks again!

Can one of you elaborate more on how you have this set up? I could use gmail, I have a gmail account I made for this, at least for sending. I obviously want to rec gmiails on my main account though. I have BI running on a windows PC, and I have a synology NAS as well if I needed a mail...

Well. After switching port/cam 7 and 3 on the poe switch, 7 disconnected as usual. 3 did not. Changed some recommended settings, toggled them, didn't work. Ethernet traffic, the pc is receiving around 46-52 Mbps. I think that's nowhere near choking a 1g connection.

How would I get to that netgear page? it's an unmanaged switch, no IP.. :( Not saying the box is not bad, but it's a 183 watt switch, I thought it'd be enough for 8 lorex cams.

Old Timer: Checked that in the camera interface, auto reboot is unchecked. Mike A: No, brand new i7-11700 PC build, Windows 11, set to never sleep. Newest News: Cam 7 did not reset on time. I made that my target camera for changing things. Still watching to see what happens. I switched...

Yea, I would have to unplug all the cams and wait at least 2 hours, Worth a try for testing the poe switch, though. Also I would use a port on a cam on one of the 3 cams that never go down. What part of VA? I'm originally from Newport News.

I also don't know if switching the POE switch to a second nic would make a difference, that's in the works as well, to see if this problem keeps going. Looking over the cam disconnect log, that I posted here, it almost keeps the same order the cams go out.

MikeA : I just wonder if the purp drive isn't spinning up fast enough when it's time to copy. The file actually gets copied, at least later, as it doesn't exist in the current directory afterwards. TVille: Haven't been able to catch that, connecting to the camera, as it only lasts less than 3...

Well, I still can't figure it out. Every 2 hours, close, those cameras lose connection. They di it while running only as a service, invisible otherwise, do it when BI is actually running and viewing cams. I'm at a loss right now.

Yep, Looney2ns, did all that. And more. Only difference was I'm using Nvidia nvdec for the hardware. GPU still runs at around 40-45C doing that, no noise. Because my old gut tells me somethings up with this 2 hour thing, I changed a couple cameras, as above, and am going to let them run...

Looks like the only common denominator, the mp is high on the dropping cameras. How do I adjust that, or should I ? Only other thing, ALL cameras have the 2 hour copy over-- (not copy over, clip size cutoff) . to store folder. That stays in line with the 2 hour drop on most cameras ?? I...

Also all cameras, although 4 different models total, are set to direct to disc, bvr. Cam 1, cam 4, cam 7 are Lorex LNE8964ab. Cam 5, cam 8 are Lorex LNE4422b. Cam 2, cam 6 is Lorex LNE8963b. Cam 3 is Lorex LNZ44p4b. Cam 3,5,8 never dropped. Have not checked firmware of each, but diff model...

Was just going to comment, all cameras dropping are 8mp listed. All fps are set to 15. Don't see where motion is detected triggering this.

And the camera log... Old school sleuthing here.... cameras dropping are under the 158 address? Except cam 3...