Recent content by Smythey

Same

Any suggestions?

I have the same problem but nothing on this page has helped me solve it. I can hear the audio if I stream directly to the browser (and on the Android mobile app) but I can hear no sound in Blue Iris. I have attached screenshots. Hopefully someone can see something wrong?

I'm using a cheap Ebay clone of the VideoSecu MIC01. As I use PoE, it's not convenient to run a 12v adapter for the mike but I just cut off the power connector for the mike and soldered on a battery connector. At the moment I'm just using a rechargeable 9v PP3 battery as it's small and fits in...

Got it! Thanks.

Update... the problem was caused by the cameras losing their port mappings (which were set via UPNP and NAT settings in the camera's web interface). I have now "hard wired" the port settings in the Network/Ports tab.

OK, I see how to do it now.

Thanks for your reply. I know how to forward ports in my router but how do I set the ports in the cameras so that they are different?

Hi I've got a couple of Hikvision cameras and they are both working fine on my network. To access both from an external IP address I have to use port mapping on one of the cameras. This worked fine when I set it up, but it keeps losing its configuration so in the Network/NAT tab I get the Port...

I eventually solved this but I don't know why things had stopped working. I deleted cached passwords in my browser, deleted the connections in iVMS-4500, deleted port mapping settings in my router, turned off UPNP and NAT in the cameras, turned them back on again and set up port forwarding...

I installed Wireshark and it seems to work over the existing network connection. However, I don't see anything in Wireshark that helps me understand the problem (i.e. logon to the camera using IP address=OK, logon via no-ip and username/password combination = not OK).

They each have a fixed IP address and I can access each using the internal IP address. Coming from outside I can see the logon screen but login fails due to the "wrong" username/password combination.

This is in the web browser (FF or IE) but I get the same problem with a slightly different message using the iVMS4500 mobile app (which was previously working fine).

I also get the message "Username or password is incorrect. Please enter again".

The fact that I get the logon screen means that the No-IP redirect is working and I've chcked that I'm not seeing a cached page. Any other ideas?