Both of you are noting light reflecting back into the dome - I'll definitely get the lawn light in the high right of the scene pointing elsewhere, but can you elaborate a bit on the reflections you all are talking about.
Is there anyone that y'all know of that I could pay for assistance in tuning my cameras? I live in a high activity neighborhood and would really like to get my cameras tuned appropriately.
I have DaHua and HKVision units.
The problem is mostly at night, images being largely not usable for...
Thanks for that answer.
Anyone know why I cannot save config changes to the camera on a lot of settings? For example, I cannot turn off 3D NR, change the backlight settings etc.
Hey folks.
Acquired a DH-IPC-HDBW54A1EN-Z
Issue 1 is that I cannot change most settings from the web console. I get an error with a red stop indicator and dialog saying "save failed!". I've not been able to figure out what is going on here.
Device Type: DH-IPC-HDBW54A1EN-Z
Software Version...
Got back from traveling and was able to resolve this.
1. Could not make it work when running as a service
2. Would only accept the path as \\192.168.X.X\dir. Mapping the directory as a drive letter did not work nor did mapping the folder as a share.
3. Moved to an i7-6700 and cpu is now below...
So the part in question from the help:
Specified above though that I created a user on the Syn with full access to the shared folder in question and that I mapped the folder on the BI box using the Syn user credentials and am not able to get BI to write here.
Re-enabled BI as a service.
Made the assumption that running as a service corresponds with "you are doing it wrong, stop doing it wrong" so I disabled that.
Still no luck writing to the share.
BI 4.4.x user
Cameras are all setup and zones are configured - object detection turned off. (no hotspots)
Have the DB path local on the machine BI is installed on.
New/Stored/Alerts are all pathed to a Syn DS+ NAS. Problem is, I can't get BI to write to any of the folders on said NAS.
-Am on...
UPDATE:
Made all the changes Q2U suggested and CPU is now hovering at ~33%.
Going to enable a second camera and make the same changes to it.
UPDATE2:
Changes Q2U suggested made to second camera and CPU is now hovering at ~38%.
UPDATE3:
All cams are enabled and have now had the changes...